【摘 要】
：
High temperature compressive tests of AZ91 Mg alloy were carried out at 573 -723 K and strain rates of 0. 001 - 1s -1. The microstructures of as-compressed samp
【机 构】
：
School of Materials Science and Engineering
论文部分内容阅读
High temperature compressive tests of AZ91 Mg alloy were carried out at 573 -723 K and strain rates of 0. 001 - 1s -1. The microstructures of as-compressed samples were observed by optical microscopy and transmission electron microscopy (TEM), and the microhardness was also tested. It is shown that with the increase of temperature or the decrease of strain rate, the flow stress decreases, at the same time the dynamic recrystallization (DRX)of the alloy is more noticeable. The microstructures reveal that continuous dynamic recrystallization, which develops through conversion of low-angle grain boundaries into high-angle boundaries, occurs preferentially at the grain boundary.
其他文献
The structural characteristics and optical and electrical properties of molecular-beam-epitaxy (MBE) grown ZnS0.8Se0.2 thin films on indium-tin-oxide (ITO) glas
Evaporating bubble column reactor (EBCR) is a kind of aerated reactor in which the reaction heat is removed by the evaporation of volatile reaction mixture. In
Interdiffusion coefficients at 950℃ and 1050℃ are calculated by Wagner analysis method as a function of composition of β-NiAI phase. Theβ-NiAI phase is form
我国冶炼业的环境问题主要包括大气污染、水污染和固体废弃物污染,以及对自然资源和能源的消耗.导致这些问题的主要原因是由于我国冶炼业的产业结构不合理.文章在借鉴国外关
The corrosion behaviors of Fe and four commercial steels with different Cr contents were investigated in an oxidizing atmosphere containing HCI at 500～600℃, whi
A three dimension of dynamic mathematical model of the molten carbonate fuel cell is established,in which the heat generation, mass transfer and electrochemical
First and Second Law analyses were conducted to evaluate the performance of a closed latent heat thermal energy storage (LHTES) system employing calcium chlorid
Several different experiments,including freezing-thawing,freezing-thawing+drying-wetting,and drying-wetting,in salt solution and in water respectively,were desi
The density, cell size and structure of closed-cell aluminum foam were measured by optical microscopy and image analysis. The properties and the mechanism of co
Welding of high strength low alloy steels (HSLA) involves usage of Iow, even and high strength filler materials (electrodes) than the parent material depending