【摘 要】
：
A new kind of corrosion resistant steel for cargo oil tanks (COT) was developed. The influences of final rolling temperature, cooling rate, and final cooling temperature on microstructure were investigated. The proper rolling process parameters were obtai
【机 构】
：
Key Laboratory of National Education Ministry for Electromagnetic Processing of Materials, Northeast
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
A new kind of corrosion resistant steel for cargo oil tanks (COT) was developed. The influences of final rolling temperature, cooling rate, and final cooling temperature on microstructure were investigated. The proper rolling process parameters were obtained through multi-pass thermal simulation test. The ifnal rolling temperature is about 820℃, the ifnal cooling temperature is about 600℃, and the cooling rate should be controlled between 10℃/s and 20℃/s. Based on the above analysis of the results, three groups of rolling samples by thermo mechanical control process are prepared. The tensile strength, yield strength, and toughness of the corrosion resistant steel are measured, which meet the requirements of DH36 steel, it can instruct the actual rolling production. The corrosion behaviour is also researched by weight loss and electrochemical impedance spectroscopic method, and it is found that the steel has good corrosion resistance performance, the best one is No.3 steel, the corrosion rate of which is about 1/4 of the accepted criterion.
其他文献
The objective of this work was to study the properties of bamboo charcoal and cement-based composite materials and their microstructure. The pastes with various bamboo charcoals were prepared and the relative properties such as setting times and strength
Thermal energy storage is an attractive option for effectiveness since it gives lfexibility and reduces energy consumption and costs. New composite materials for storage and transformation of heat of NaCl-Al2O3 composite materials were synthesized by one-
This work mainly involved the preparation of a nano-scale form-stable phase change material (PCM) consisting of capric and myristic acid (CA-MA) binary eutectic acting as thermal absorbing material and nano silicon dioxide (nano-SiO2) serving as the suppo
Micro compression and micro extrusion experiments of ultrafine grained titanium cylindrical specimens in diameters of 4,2,and 1 mm prepared by equal channel angular pressing (ECAP) were conducted on the micro plastic forming test machine.The effects of sp
Diblock copolymers polystyrene-block-polyvinyltriethoxysilane (PS-b-PVTES) were synthesized via atom transfer radical polymerization (ATRP), which self-assembled into spherical micelles in solvent of THF-methanol mixtures. The self-assembled micelles were
Indium doped ZnO films were grown on quartz glass substrates by radio frequency magnetron sputtering from powder targets. Indium content in the targets varied from 1at% to 9at%. In doping on the structure, optical and electrical properties of ZnO thin fil
The dispersion ability of polycarboxylate superplasticizer (PCE) in fresh concrete was much impeded by clay impurities. To improve the dispersion of PCE in the clay-contained concrete, a novel PCE with carboxyl as a specific branched chain terminal group
Hydraulic characteristic is a good indication of binder hydration,which determines the strength development of cemented paste backfill (CPB).Therefore,the hydraulic characteristic should be communicated with the mechanical property to provide an advanced
We investigated the influences of process parameters on the head curvature of pure titanium sheet in hot rolling process and proposed the controlling means.First,the thermal simulation experiments for pure titanium TA1 were carried out to investigate the