论文部分内容阅读
西德博施公司在不断发展热能去毛刺法。该公司生产了约5种热能去毛刺机,它们的结构都差不多,只是去毛刺高压罐容积不同。最小的直径为120mm,高为300mm,价格约20万马克;最大的直径为150mm,高为320mm,价格约60万马克。去毛刺机结构如图所示。将铸件装在强度很高的去毛刺高压罐1内,用液压或机械方法将底盘5压向高压罐下部使其封闭。根据去毛刺机类型的不同,转台上有5或6个底盘。在气体定量机构的双缸12里形成按一定比例配合的氢氧混合气体。很多可燃气体
West Germany Boss Company in the continuous development of thermal deburring. The company produces about five thermal deburring machines, all of which are similar in structure, except that the deburring high-pressure tank has different volumes. The smallest diameter of 120mm, height of 300mm, the price of about 200,000 marks; the largest diameter of 150mm, height 320mm, the price of about 600,000 marks. Deburring machine structure as shown. The castings are mounted in a high-strength deburring high-pressure tank 1, and the chassis 5 is hydraulically or mechanically closed to the lower portion of the high-pressure tank. Depending on the type of deburring machine, there are 5 or 6 chassis on the turntable. In the gas metering mechanism cylinder 12 to form a certain proportion of hydrogen and oxygen mixed gas. A lot of combustible gas