Effect of particle type on the shear behaviour of granular materials

来源 :颗粒学报(英文版) | 被引量 : 0次 | 上传用户:zcskill
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In discrete element method(DEM)simulations,multi-sphere(MS)clumped and convex particles are two main particle models that are used to study the mechanical behaviours of granular materials.Of interest is the evaluation of the effect of multiple contacts between clumped particles or single contacts between convex particles on the mechanical behaviours of granular materials.In this context,a series of drained triaxial compression tests were conducted on convex true(CT)ellipsoids and MS ellipsoids with aspect ratios(ARs)ranging from 1.0-2.0.The microscale results indicate that at a given AR,the critical friction angle ψc changes with the particle type,whereas the peak friction angle ψp is nearly independent of the particle type.The anisotropic analysis provides underlying mechanisms of the shear strength evolution from two perspectives.First,the anisotropies of granular materials are essential to shear strength as the deviatoric(q)-to-effective mean(p')stress ratio can be expressed as the sum of the anisotropies,i.e.,q/p'≈ 0.4ac+0.4an+0.6at,where ac,an and at are the normal contact anisotropy,normal contact force anisotropy and tangential contact force anisotropy,respectively.For all samples,ac and an underpin the shear strength and are influenced by the particle type.The similar ψp displayed by the CT and MS ellipsoids does not translate to similar an and ac but similar ac+an for the two particle types.In addition,owing to their larger ac+an,the CT ellipsoids have a higher ψc than the MS ellipsoids.Second,there is a satisfactory linear relationship between q/p'and ac within strong and non-sliding(sn)contacts asnc(i.e.,q/p'=kasnc),where k is the fitting parameter.Accordingly,in the peak state,the subtle difference in shear strength is attributed to the greater asnc in the CT ellipsoids than in the MS ellipsoids that is counteracted by the smaller k.However,in the critical state,the greater difference in asnc between the CT and MS ellipsoids is partially offset by the smaller difference in k,causing a higher ψc in the CT ellipsoids than in the MS ellipsoids.
其他文献
电力是我们日常生活中不可缺少的一项资源,在电力系统中,高压电力电缆就是其中较为重要的结构与形式。高压电力电缆的使用可以促使电力的正常供应,而高压电力电缆中的运行隐
The critical state soil mechanics(CSSM)framework has been widely used across a range of problems in geomechanics involving complex loading conditions.However,th
水利水电工程施工安全管理是一种现代化发展手段,随着施工技术的提升,传统的水利水电工程施工安全管理机制已无法全面覆盖项目作业的施工安全.本文就水利水电工程施工安全管
轨道交通的不断发展对车辆结构设计提出了更高的要求,车头设计因其对整车效果有着重要的影响而备受关注。本文介绍了某轨道交通车辆铝合金车头结构设计和有限元分析计算,车头
变电站在整个电力系统中起着非常关键的作用,其运行的正常与否将直接关系着整个电力系统的安全性和稳定性。然而在变电站运行过程中,可能出现的误操作事件会对变电站的正常运
近几年,我国工业化发展速度得到了一个明显的提升,主要原因在于经济的稳定性增长。在工业生产和人们的日常生活中,离心式风机的应用越来越广泛,它是一种基于制冷空调系统中的
机电一体化系统中使用了大量的传感器来感知周围的情况,保证对系统的运行作出精确的控制.因此,传感器技术的提升能够推动机电一体化系统的各项工作水平的提升,对提升系统的工
由于企业和学校以往所购置的机床加工设备具有低效率、低质量以及高故障率的问题,因此无法促进现代制造的发展,此类设备需要淘汰。由于数控机床有着昂贵的价格,需要一次性进
从传统的烟机设备技改安装施工管理来看,往往存在着很多问题,从而影响了施工的质量和进度,不利于企业的长久发展。对此,为进一步提高烟机设备技改安装施工管理质量,本文主要
带表卡尺是一种应用广泛的量具,现有的测力卡尺是人手推动活动量爪进行测量,对于同一测量物件,不同次数的测量,会有不同的测量结果,产生较大的测量误差。针对上述问题,反复研