钢门窗玻璃安装的方法如下。1.清理:将玻璃槽口的灰尘清扫干净,槽口处如有雨水,应用干抹布擦干净,同时还要检查四角有没有焊渣。如有焊渣要处理掉。2.抹底油灰:安装玻璃时,先要抹好底油灰,底油灰最好要比面油灰稍稀一点。铺抹底油灰要均匀饱满,厚度至少为2～3毫米,不能有间断的地方。所嵌的底油灰和面油灰中都要酌加红丹粉和铅油,以 The method of installing the steel window glass is as follows. 1. Clean up: Clean the dust from the glass notch. If there is rain at the notch, clean it with a dry rag. Also check that there is no welding slag in the corner. If any welding dross is to be disposed of. 2. Smear putty: When installing the glass, first wipe the end of putty, the bottom putty is better than the face putty slightly thinner. Spread the end of the putty to be even and full, at least 2 to 3 mm in thickness, and there must be no discontinuity. The red and pink oils should be added to the bottom putty and surface putty