论文部分内容阅读
一、概述1.测量依据JJF1169-2007《汽车制动操纵力计校准规范》2.环境条件温度:0～40℃;湿度:≤85%RH3.测量标准M1级砝码4.被测对象汽车制动操纵力计,MPE:±5%5.测量过程使用标准砝码作标准,通过校准装置直接将砝码施加在制动力操纵力计传感器上,读取被测仪器示值,其与标准砝码标称值之差即为被测操纵力计的示
I. Overview 1. Measurement based on JJF1169-2007 “Automotive brake Manometer Calibration Specification” 2. Environmental conditions Temperature: 0 ~ 40 ℃; Humidity: ≤ 85% RH3. Measurement standards M1-class weight 4. The object vehicle Brake Manometer, MPE: ± 5% 5. The measurement process using the standard weight as a standard, the calibration device directly to the weight applied to the brake force manipulator sensor, read the measured value of the instrument, which is different from the standard The difference between the nominal weights is the indication of the manometer tested