Interface fracture toughness and fracture mechanisms of plasma-/sprayed thermal barrier coatings(TBCs) were investigated by interfacial indentation test(IIT) in combination with acoustic emission(AE) measurement.Critical load and AE energy were employed to calculate interface fracture toughness.The critical point at which crack appears at the interface was determined by the IIT.AE signals produced during total indentation test not only are used to investigate the interface cracking behavior by Fast Fourier Transform(FFT) and wavelet transforms but also supply the mechanical information.The result shows that the AE signals associated with coating plastic deformation during indentation are of a more continuous type with a lower characteristic frequency content(30-60 kHz),whereas the instantaneous relaxation associated with interface crack initiation produces burst type AE signals with a characteristic frequency in the range 70- 200 kHz.The AE signals energy is concentrated on different scales for the coating plastic deformation,interface crack initiation and interface crack propagation.Interface fracture toughness calculated by AE energy was 1.19 MPam~(1/2) close to 1.58 MPam calculated by critical load.It indicates that the acoustic emission energy is suitable to reflect the interface fracture toughness. Interface fracture toughness and fracture mechanisms of plasma- / sprayed thermal barrier coatings (TBCs) were investigated by interfacial indentation test (IIT) in combination with acoustic emission (AE) measurement. Critical load and AE energy were employed to calculate interface fracture toughness. critical point at which crack appears at the interface was determined by the IIT. AE signals produced during total indentation test not only to used to investigate the interface cracking behavior by Fast Fourier Transform (FFT) and wavelet transforms but also supply the mechanical information. result shows that the AE signals associated with coating plastic deformation during indentation are of a more continuous type with a lower characteristic frequency content (30-60 kHz), while the instantaneous relaxation associated with interface crack emission produces burst type AE signals with a characteristic frequency in the range 70-200 kHz. The AE signals energy is concentrated on different s cales for the coating plastic deformation, interface crack initiation and interface crack propagation.Interface fracture toughness calculated by AE energy was 1.19 MPam ~ (1/2) close to 1.58 MPam calculated by critical load. It means that the acoustic emission energy is suitable to reflect the interface fracture toughness.