论文部分内容阅读
本文简单介绍一套多功能的复合模。模具冲制的零件为电冰箱的压缩机接水盘。 图1为零件简图。零件的材料为L3M,厚度为0.5mm。零件须在中间部位进行凸苞拉伸和冲一条斜槽;凸苞中间有0.5mm深的压型和一个φ7的小孔;在零件周边进行带凸缘的浅拉伸;零件的一边上冲一个R4
This article briefly introduces a multi-functional composite mold. Mold parts for the refrigerator compressor compressor water tray. Figure 1 is a part sketch. Parts of the material is L3M, a thickness of 0.5mm. The part must be in the middle of the brim stretch and punch a chute; the middle of the brim 0.5mm deep and a type of small hole φ7; shallow flange with flange around the parts; part of the punch on the red A R4