Accurate reconstruction of electric field of ultrashort laser pulse with complete two-step phase-shi

来源 :HighPowerLaserScienceandEngineering | 被引量 : 0次 | 上传用户:dozen
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
This paper presents a complete two-step phase-shifting (TSPS) spectral phase interferometry for direct electric-field reconstruction (SPIDER) to improve the reconstruction of ultrafast optical fields. Here, complete TSPS acts as a balanced detection that can not only remove the effect of the dc term of the interferogram, but also reduce measurement noises, and thereby improve the capability of SPIDER to measure the pulses with narrow spectra or complex spectral structures. Some prisms are chosen to replace some environment-sensitive optical components, especially reflective optics to improve operating stability and improve signal-to-noise ratio further. Our experiments show that the available shear can be decreased to 1.5% of the spectral width, which is only about 1/3 compared with traditional SPIDER.
其他文献
期刊
提出一种利用高斯光束柱面反射展成法生成光刀的新方法,并导出了光刀几何参数的预估算式。实验表明,采用该方法生成的激光光刀线宽变化小,对比度高,景深大,适合作为主动式三维面形测量用线结构光。
本文发展了一种描述锁模激光脉冲序列输出的全量子理论.采用“相干叠加”模型,即认为从多模相干态光场不同模吸收光子后的原子态是相干的,耦合形成相干组合态.考虑锁模激光各模式间相位关系.用多模相干态描述光场,应用预解算符和投影算符推导演化算符,使本方法可统一处理锁模激光脉冲序列输出及原子的共振多光子过程.
期刊
期刊
一种具有高效率和要求低功率的普克耳池(Pockel’s cell)光激射器Q开关巳由西屋公司的防御和空间中心硏制出,这种用于光雷达和光激射器通讯的调制器具有非常高的发送速率。这种固态装置是一个控制光激射器腔的Q值光闸,有时称为Q调制器,在同一周期内使光激射器腔发射短而功率高的脉冲,而不是一系列低功率的脉冲。
期刊
以1.06μm调Q-锁模激光泵浦CBrCl3液芯光纤,观察到11级受激喇曼散射,测量了各级受激喇曼散射的相对峰值功率及第9、10和11级的频谱.这种液芯光纤中的受激喇曼散射可作为获得2μm以上波段红外相干光的手段.
提出了一种基于微透镜列阵三维成像的防伪标签设计及制备方法。建立了基于微透镜列阵的三维成像模型,开展了三维成像系统关键部件—微结构图像阵列和高精度微透镜阵列的生成及制备技术的研究。针对所要获取的三维立体影像,利用3DMAX软件对三维成像结构进行设计,采用微细加工技术对三维成像结构中所需的微结构及高精度微透镜列阵进行制备。最终成功制备了高分辨率防伪标签。
This paper describes the specially designed geometry of a dry-etched large-wedge-angle silica microdisk resonator that enables anomalous dispersion in the 780 nm wavelength regime. This anomalous dispersion occurs naturally without the use of a mode-hybri
期刊
We report dual-view band-limited illumination profilometry (BLIP) with temporally interlaced acquisition (TIA) for high-speed, three-dimensional (3D) imaging. Band-limited illumination based on a digital micromirror device enables sinusoidal fringe projec
期刊
薄膜光学常数的精确测定对于设计和制备多层薄膜具有重要意义。在JGS1型熔融石英基底上,采用热蒸发沉积方法制备了不同厚度的LaF3单层薄膜样品,利用光度法来获取弱吸收薄膜和基底的光学常数,计算得到其在185~450 nm范围内折射率n和消光系数k的色散曲线。实验结果表明,当膜层厚度较薄时,LaF3薄膜折射率表现出不均匀性现象。随着薄膜厚度的增加,薄膜折射率不均匀性减小。在求解过程中选用不均匀模型后,拟合结果与实际测试光谱曲线吻合得很好,提高了薄膜光学常数的计算精度。