1.前轮外倾角的检测 (1)将车辆处于直线行驶状态停放,将水准仪蓝箭头指示的定位销轴插入被测车轮安装的支架的相应的插孔内,并使其沿着定位销轴的方向基本处于水平状态。 (2)轻轻旋紧弹簧卡锁紧螺钉,使水准仪固定在支承架上。转动调节盘“A”,直到水准仪水准泡处于中间位置,在蓝刻盘上读出“A”盘上红线所示角度值,即为该 1. Front camber detection (1) The vehicle is parked in a straight line driving state, the level of the blue arrow pointing pin into the corresponding wheel mounting bracket mounted on the jack and make it along the positioning pin The direction of the basic level. (2) Gently tighten the spring lock screw to fix the level on the support bracket. Turn the adjustment dial “A” until the level bubble is at the middle position, and read the angle value shown by the red line on the “A” dial on the blue dial, which is the