我单位有十几台A62录相机,由于使用年久,常出现装盒、加载不到位现象,据多次维修经验证明,此类机子多数为加载、出盒皮带和方式开关脏污所致,只要清洗干净稍作处理后即可排除故障。 故障现象:插入磁带后装盒未到位马上又退出来,有时偶尔能装盒到位,装盒到位后按放像键加载不到位,用手动卸载后再行加载还是不到位,反复多次试验发现,在加载时用手给左右加载臂稍加力就能放像。 My unit has more than a dozen A62 camera, due to the use of long, often appear boxed, loading is not in place, according to several maintenance experience shows that the majority of such loaders to load, out of box belts and the way the switch dirt, As long as cleaning can be ruled out after a little treatment. Symptom: Insert the tape box is not in place immediately after the withdrawal, and sometimes occasionally boxed in place, press the play button in place after the carton loading is not in place, manually uninstall and then reload or not in place, repeatedly found that many experiments , Loading the arm around the loading arm with a little effort will be able to play.