四羟甲基氯化膦无铬鞣的机理

来源 :中国化学工程学报(英文版) | 被引量 : 0次 | 上传用户:chaoge100
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Tetra-hydroxymethyl phosphonium chloride (THPC) has been considered as an important chrome-free tanning agent. To understand the THPC tanning mechanism, the structure, charge distribution, activity and tanning ability of each phosphorous compound in THPC tanning system were studied, by 31P NMR, FT-IR spectroscopy, differential scanning calorimetry (DSC) and computational chemistry method, etc. When pH raised to 6.0, the decomposition of THPC would take place, which results in a production of free formaldehyde, tri-hydroxymethyl phosphonium (TrHP) and tri-hydroxymethyl phosphine oxide (TrHPO). At pH 9.0, THPC will be converted completely to TrHP and most TrHP is further oxidized into TrHPO. It is possible that, in reaction of phosphorous compounds and collagens, both P-C and C-O bonds would break simultaneously or individually. From molecular charge distribution and bond polar properties, it is deduced that, if P-C bonds break, the activity is in order of TrHPO>THPC>TrHP, whereas if C-O bonds break, the order is TrHP>THPC>TrHPO. It is more possible that P-C bonds will break in reaction with collagen, and TrHPO may be more active in the THPC tanning system. The results of tanning and DSC also prove the above conclusion. Furthermore, the fact that the shrinkage temperature of THPC tanned leather was below 70℃ when basified to pH 5.0 or lower suggests that the hydroxymethyl groups of THPC and TrHP are less possible to combine directly with amino groups of collagen.
其他文献
2×(FeNi/CoZnO)/ZnO/(CoZnO/Co)×2 spin-inJection devices were prepared by sputtering and photo-lithography. In the devices, two composite magnetic layers 2×(Fe
Taguchi approach was applied to determine the most influential control factors which will yield better tensile strength of the joints of friction stir welded RD
In this work,alpha(α)brass was poured in green sand mould and metallic chill mould at about 1050℃. Sand casting method and metallic chill casting method are r
The bioleaching behavior of low-grade copper sulphides under the condition of preferential solution flow was investigated through experiments.The experiment of
Multiple-metal catalysts (Ni-Mn-Ce-K/bauxite) for Water-Gas Shift (WGS) reaction were prepared by impregnation, and the catalytic structure and properties were
During the splitting spinning process,the material parameters of disk blank have a significant effect on the determination of forming parameters and the quality
Chemical conversion treatment by rare earth metal salt solution was considered as an alternative to chromium chemical conversion treatment to improve the corros
The effects of the proportion of fine aggregate, the maximum size of the aggregate and the proportion of the 9.5mm to 4.75mm particle in the coarse aggregate on
A liquid-solid metathetical reaction method (LSMRM) of synthesizing AlN nanocrystallines is presented. AlN nanocrystallines made through LSMRM are characterized
The feasibility of fabricating ZA84 magnesium alloy with non-dendritic microstructure by a semi-solid isothermal heat treatment process and the effects of holdi