Foreword

来源 :辐射防护 | 被引量 : 0次 | 上传用户:skal1125
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
It was our great privilege to host the Tenth International Symposium on Radiation Safety and Detection Technology (ISORD-10) in Taiyuan, Shanxi, China, on July 16-19, 2019. On behalf of China Institute for Radiation Protection (CIRP), the local host, I would like to avail myself of this opportunity to extend sincere gratitude to sponsors of the symposium, Tohoku University of Japan and Hanyang University of Korea, and the supporting organizations including China Society of Radiation Protection, China Institute of Atomic Energy and Tsinghua University.
其他文献
采用Gleeble-1500D热模拟试验机,在变形温度为900~1250℃、应变速率为0.001~1 s-1的条件下对铸态ER8车轮钢进行热压缩试验,得到真应力-真应变曲线.结果发现:其真应力-真应变曲
针对铸态Mn18Cr18N电渣重熔钢进行了单道次直接轧制,其压下率分别为10%,30%,40%和50%,并借助电子背散射仪(EBSD)观察了微观组织,结果表明,单道次轧制时,随着压下率的增大,组织逐
根据18组热模拟试验及不同工艺参数的设计,获得TL1438非调质钢经过亚动态再结晶后的应力-应变曲线,比较了应变量、应变温度、应变速率、两次压缩后的保温时间对该过程的影响.