中央传动齿轮工作不到500小时,因其它原因拆卸后复装时的检查调整的关键是保证复装时尽可能地恢复到拆卸前的齿轮副的原始啮合状态。具体步骤如下: 1.拆卸前打啮合顺序号。 凡大、小圆锥齿轮部是偶数(如东方红-75为44、14;丰收-27为40、6)或同是奇数(如铁牛-55为53、13,东方红-30为39、9), Central transmission gear work less than 500 hours, for other reasons after the demolition of the inspection and adjustment of the key is to ensure that the resettlement to the original gear mesh as much as possible before disassembly state. Specific steps are as follows: 1. Before disassembling the meshing sequence number. Where large and small bevel gear part is even (such as Dongfanghong -75 to 44,14; bumper-27 to 40,6) or with the same number (such as the tractor -55 53,13, Dongfanghong -30 to 39, 9),