论文部分内容阅读
一、概述我厂生产的液压平板硫化机,是为满足橡胶制品的压制工艺而设计的。除个别类型外,基本上都采用压上式的柱塞式缸结构,即柱塞、平板及模具等由液压油推动上行并闭模,待硫化结束后,则靠柱塞,平板及模具等的自重排油下降。因此,这样的开模速度较慢。近年来,平板硫化机开始被用来压制橡—塑两用的高发泡材料。该材料的压制,要求平板硫化机有很
First, an overview of our factory production of hydraulic plate curing machine, is to meet the compression of rubber products and design. In addition to individual types, basically the use of pressure on the plunger cylinder structure, that is, plunger, plate and mold driven by the hydraulic oil upstream and closed mold, to be cured after the end, then rely on plungers, plates and molds The weight of the oil drop. Therefore, such a mold opening speed is slower. In recent years, flat-panel curing machine began to be used to suppress the rubber - plastic dual-use high foam material. The material is pressed, flat vulcanizer is required