【摘 要】
：
Cavity-coupled plasmonic structure is demonstrated to be a simple and effective tool to manipulatelight, enhance the biosensing figure of merit, and control the polarization state. In this Letter, we demonstrate the tunability of the chiroptical effect of
【机 构】
：
SchoolofPhysicalScienceandTechnology,SichuanUniversity,Chengdu610064,ChinaKeyLaboratoryforHighEnergy
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
Cavity-coupled plasmonic structure is demonstrated to be a simple and effective tool to manipulatelight, enhance the biosensing figure of merit, and control the polarization state. In this Letter, we demonstrate the tunability of the chiroptical effect of cavity-coupled chiral structure, i.e., sandwich chiral metamaterials (SCMs), in whichradiation coupling dominates the interaction between particles. Two types of SCMs whose building blocks are 3D chiral and 2D chiral, respectively, are numerically studied. Distinct responses are observed in these two materials. The chiroptical effect can be effectively manipulated and enhanced in the 2D case, while the SCMs consisting of 3D chiral layers keep the chiroptical effecta constant. A theoretical analysis based on matrix optics is developed to explain the corresponding phenomena, which gives a reasonable agreement with numerical simulations.
其他文献
研究了在光泵远红外激光器中插入无源隔离装置对几条已知远红外激光线的影响。另外，增加了激光输出的稳定性，用隔离装置改变了泵浦功率对远红外功率的转换效率和远红外输出的偏振状态。
众议院武装部队委员会已建议停止远景局管理的三项主要高能激光可行性论证计划中的两项，开始全力以赴地发展短波长激光。
BiOx films are prepared by reactive direct current (DC) magnetron sputtering from a metallic bismuth target in Ar O2 with different O2/Ar ratios. It is found that the optical property of BiOx films is sensitive to O2/Ar ratios and the films deposited at
Finite element method and ultrafast thermoelasticity model are combined to simulate the microbump formation irradiated by a femtosecond laser. It has been shown that the effect of microbump formation is related to the characteristic of incident femtosecon
提出一种具有光束会聚功能的单层亚波长光栅结构,该结构能实现光束会聚及四路分光。利用严格耦合波分析法和波前相位控制原理设计并优化该亚波长光栅结构,并给出具体相位设计规则。基于有限元软件COMSOL对其进行仿真分析,结果表明,当波长为1550 nm 的横磁(TM)偏振光入射时,该结构可实现四路分束,每束光功率都相等且可实现光束会聚,经计算得到总体透射率为92.670%。该亚波长光栅结构有望在光通信集成以及空间光耦合等领域得到重要应用。
以液压立柱材料45钢为基体，316不锈钢粉末为熔覆材料，采用不同的工艺参数在基材表面进行激光熔覆试验，制备316不锈钢涂层；然后利用FANUC数控机床对不锈钢涂层进行车削加工，采用数字化测试技术对车削成形试样熔覆层的表面宏观形貌、切屑形态、表面粗糙度、圆柱度、洛氏硬度、显微组织等进行研究，综合分析45钢表面激光熔覆316不锈钢涂层的车削加工性能，优选出最佳的激光熔覆工艺参数。在激光功率为800 W、送粉速率为0.28 g/s、轴向进给速度为0.110 mm/s的最佳熔覆工艺参数下，熔覆层的表面宏观形貌和切
研究了AgGaS2晶体对TEA CO2 10.6微米激光的倍频特性。晶体厚度4.3毫米时倍频转换效率为0.122％。实测相位匹配角71.5％,调节宽度8°±1°。实验结果与理论计算值非常一致。
报道了研制主振-放大（MOPA）结构的高功率保偏掺镱脉冲光纤激光器并用其抽运光参变振荡器（OPO）的研究工作。掺镱脉冲光纤激光器以声光调Q的Nd∶YVO4激光器作为种子源, Liekki的大直径双包层保偏光纤作为放大介质, 得到接近基模的1064 nm波长激光输出, 最大线偏振输出功率17 W, 偏振消光比优于10 dB, 重复频率50 kHz, 脉冲宽度60 ns。利用该光纤激光作为抽运光, 抽运基于周期性畴极化反转掺镁铌酸锂（PPMgLN）晶体的宽带可调谐OPO, 实现了高效参量转换。在信号光1518