Resistance Switching Properties of Ag/ZnMn2O4/p-Si Fabricated by Magnetron Sputtering for Resistance

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:haosy2966
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A resistance random access memory (RRAM) with a structure of Ag/ZnMn2O4/p-Si was fabricated by magnetron sputtering method. Reliable and repeated switching of the resistance of ZnMn2O4 iflms was obtained between two well-deifned states of high and low resistance with a narrow dispersion and 3V switching voltages. Resistance ratio of the high resistance state and low resistance state was found in the range of around 103 orders of magnitude and up to about 103 test cycles. The retention time of Ag/ZnMn2O4/p-Si device is longer than 106 seconds and the resistance ratio between two states remains higher than 103 at room temperature, showing a remarkable reliability performance of the RRAM devices for nonvolatile memory application. The equivalent simulation circuits for HRS (high resistance state) and LRS (low resistance state) were also studied by impedance spectroscopy.
其他文献
NiCr micron-resistor was designed and prepared by magnetron sputtering and lithography on the substrate of silicon with different powers. It is found that there exists a big gap in the TCR between the annealed group and the un-annealed group. A series of
The correlation between the internal friction behaviour of Zr55Al10Ni5Cu30 BMG samples and their quenching temperatures was investigated. It was found that, below the glass transition temperature, the activation energy decreased with increasing quenching
By measuring the expansion curves of a Nb bearing steel at different cooling rates by using Gleeble-3800 thermomechanical simulator, combining with metallographic analysis, different phase zones were determined. Also, precipitation behavior of Nb at diffe
Carbon nanoparticles (C-dots) were prepared by relfuxing the combustion soots of candles and corn stalk in nitric acid. The synthesized C-dots were characterized. The results showed a sharp increase in oxygen content and a sharp decrease in carbon content
The ultrafine crystalline CuCr50(Cr 50 wt%) alloys were fabricated by a combination of mechanical alloying and spark plasma sintering process. The effects of milling time on crystallite size and solid solubility of the CuCr50 composite powders were invest
A simple and green method was introduced to fabricate the electrochemical sensor based on the electrochemically reduced graphene oxide (ERGO) modified electrode. It was found that the ERGO modified electrode exhibited an excellent catalytic activity towar
Iridium dioxide with different morphologies (nanorod and nanogranular) is successfully prepared by a modiifed sol-gel and Adams methods. The catalytic activity of both samples for oxygen reduction reaction is investigated in an alkaline solution. The elec
TWIP steels with 70%cold-rolled reduction were heated at 500, 600, 700, 800, 900, 1000, and 1100℃. Then, the properties before and after heating were examined through tensile and hardness experiments. The microstructures were also analyzed by optical micr
The synthesis of Nd3+, Y3+:CaF2 nanopowder was conducted by azeotropic distillation method, which effectively dehydrated hydrous CaF2 and prevented forming hard agglomerates. X-ray diffraction (XRD), scanning electron microscopy (SEM), scanning calorimetr