Rheological Behaviors of Fresh Cement Pastes with Polycarboxylate Superplasticizer

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:shenxiaoxia123
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The rheological behaviors of fresh cement paste with polycarboxylate superplasticizer were systematically investigated. Inlfuential factors including superplasticizer to cement ratio (Sp/C), water to cement ratio (w/c), temperature, and time were discussed. Fresh cement pastes with Sp/Cs in the range of 0 to 2.0% and varied W/Cs from 0.25 to 0.5 were prepared and tested at 0, 20 and 40 °C, respectively. Flowability and rheological tests on cement pastes were conducted to characterize the development of the rheological behavior of fresh cement pastes over time. The exprimental results indicate that the initial lfowability and lfowability retention over shelf time increase with the growth in superplasticizer dosage due to the plasticizing effect and retardation effect of superplasticizer. Higher temperature usually leads to a sharper drop in initial lfowability and lfowability retention. However, for the cement paste with high Sp/C orw/c, the lfowability is slightly affected by temperature. Yield stress and plastic viscosity show similar variation trends to the flowability under the abovementioned inlfuential factors at low Sp/C. In the case of high Sp/C, yield stress and plastic viscosity start to decline over shelf time and the decreasing rate descends at elevated temperature. Moreover, two equations to roughly predict yield stress and plastic viscosity of the fresh cement pastes incorporating Sp/C,w/c, temperature and time are developed on the basis of the existing models, in which experimental constants can be extracted from a database created by the rheological test results.
其他文献
The morphology,nanomechanical properties and interfacial regions of natural rubber(NR)and FeCo nanoparticles composite were determined by AFM nanomechanical mapping.The results showed that the size of FeCo particles was mostly from 40 to 100 nm and the Fe
In order to present a novel metronidazole-decorated Ti implanted with antibacterial activity through adhesive dopamine,and prepare metronidazole-decorated Ti,Ti substrates were pre-modified with dopamine (DA) coating,and metronidazole was subsequently imm
The relationship between compressive strength obtained by universal testing machine and rebound value obtained by the hammer of high performance concrete was systematically investigated at the macro level. And a model of high performance concrete strength
Two kinds of 2.5D deep straight-joint structure ultra-high molecular weight polyethylene (UHMWPE) (twisted and original) fibers woven fabric reinforced epoxy resin composites were prepared by the hand lay-up method. Subsequently, the flexural property, mi
Electromagnetic (EM) wave absorbing cement-based composite has promising applications in protecting civil and military buildings from electromagnetic interferences. A new idea of preparing EM wave absorbing cement-based composite is proposed by using cera
Static and dynamic compression tests were carried out on mortar and paste specimens of three sizes (f68 mm×32 mm,f59 mm×29.5 mm andf32 mm×16 mm) to study the inlfuence of specimen size on the compression behavior of cement-based materials under high strai
Colloidal semiconductor nanoparticles (quantum dots, QDs) have attracted a lot of interests in numerous biological and medical applications due to their potent fluorescent properties. However, the possible toxic effects of quantum dots remain an issue of
We present the specific ab-initio calculations that detail the variations of perovskite BaZrO3 caused by in-plane strain.Specifically,the internal relaxation,which was not captured in the widely used biaxial strain model,was included in a complementary ma
The physical properties and hydration of a cementitious material, which prepared mainly from the vana-dium slag and phosphate slag, were investigated. These slags were investigated can be reused as original resources to prepare cement clinker based on the
The effects of four sand contents on the compressive,flexural and splitting-tensile strength of cement mortars were evaluated.Moreover,we experimentally investigated the pore structure of cement mortar brought about by changing the sand content and water/