日本质子加速器研究设施中的中能束流传输线及其升级设计

来源 :高能物理与核物理 | 被引量 : 0次 | 上传用户:yyy_chj
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
中能束流传输线(MEBT)在日本质子加速器研究设施(J-PARC)中对控制束流损失起到非常关键的作用.中能传输线已经成功设计和建造,并进行了束流实验.简要介绍了中能传输线及其束流实验的结果.为进一步减少和消除传输线中的束流切割器的上升和下降过程中产生的不稳定粒子,以满足更高流强下的束损要求,给出了一个带有反束流切割器的中能传输线的升级设计,该设计已被用作该项目的备用方案.升级设计的中能传输线要完成三个任务:完成从RFQ到DTL的束流相空间匹配;利用束流切割器把束流切割成注入快循环时所需要的束流结构,以及利用反束流切割器把束流切割器上升和下降时间段产生的部分偏转的不稳定粒子作用回DTL的相空间接收度内,以减少和避免粒子丢失.在该中能传输线中,RF偏转器被用来作为束流切割器和反束流切割器.RF偏转器是中能传输线中最关键的部件,进一步讨论了RF偏转器作为反束流切割器的优化设计.也给出了该传输线的动力学分析的结果.
其他文献
In this paper, we determine all second order minimal Lagrangian submanifolds in complex space forms whose cubic forms have the largest non-trivial continuous sy
A new style of discharge process from a vertical open-top pipe with capillary outlet is reported. The outflux fluctuates greatly with time and the bulk condense
The invasion of cytotrophoblast cells into the maternal endometrium during embryonic implantation is very similar to the metastasis of carcinoma cells. However,
Here we report a combustion endstation at National Synchrotron Radiation Laboratory (NSRL) and some primary experimental results. Synchrotron radiation can prov
深入讨论了如何提高铅-闪烁光纤夹层电磁量能器角分辨的分析方法.用MC方法模拟量能器对不同能量光子事例的响应,得到了量能器电磁簇射位置测量误差函数;通过量能器束流测试数
In the present paper, we investigate the non-Heegaard 2-compressible surfaces in small 3-manifolds, and show that such surfaces have some good properties.
The catalysts of copper oxide supported on cerium dioxide were prepared by different methods for methane catalytic combustion. The effects of copper content in
Ni-Ce0.8Sm0.2O1.9 (Ni-SDC) cermet was selected as anode material for reduced temperature (800 ℃) solid oxide fuel cells in this study. The influence of NiO pow
通过重离子核反应与在束γ谱的实验技术,对A=130缺中子核区的双奇核136La的高自旋态进行了研究,所用核反应为130Te(11B,5n).实验结果扩展了136La的能级纲图,包括3个集体转动
为探究吕家坨井田地质构造格局,根据钻孔勘探资料,采用分形理论和趋势面分析方法,研究了井田7