【摘 要】
：
采用传统陶瓷制备工艺,制备了掺杂Na2O-CaO-B2O3(NCB)氧化物的Ca0.3(Li1/2Sm1/2)0.7TiO3(CLST)陶瓷,研究了NCB掺杂量与晶相组成、显微结构,烧结性能及微波介电性能的关系.研
【机 构】
：
景德镇陶瓷学院,浙江正原电气股份有限公司
论文部分内容阅读
采用传统陶瓷制备工艺,制备了掺杂Na2O-CaO-B2O3(NCB)氧化物的Ca0.3(Li1/2Sm1/2)0.7TiO3(CLST)陶瓷,研究了NCB掺杂量与晶相组成、显微结构,烧结性能及微波介电性能的关系.研究结果表明:复合氧化物NCB掺杂量在1wt%～15wt%范围内没有杂相生成,晶相仍呈斜方钙钛矿结构.随着NCB添加量的增加,陶瓷致密化温度和饱和体积密度降低,介电常数εr、无载品质因数与谐振频率乘积Qf值也呈下降趋势,频率温度系数Τf向正方向增大. NCB氧化物掺杂能有效地将CLST陶瓷的烧结温度由1300℃降低至900℃.添加12.5wt%NCB的CLST陶瓷在低温900℃烧结5h仍具有良好的微波介电性能: εr=73.7,Qf=1583GHz,Τf=140.1×10-6/℃,满足高介多层微波器件的设计要求.
其他文献
The austenite grain growth behavior in a simulated coarse-grained heat-affected zone during thermal cycling was investigated via in situ observation. Austenite
The surfaces of X80 pipeline steel welded joints were processed with a CO2 laser, and the effects of laser heat treatment (LHT) on H2S stress corrosion in the N
The densification mechanism of an Fe-based alloy powder containing tiny oxide particles under the synergic multi-field effect of spark plasma sintering(SPS) was
To enable the use of metallic components in direct methanol fuel cells (DMFCs), issues related to corrosion resistance must be considered because of an acid env
The fabrication of an alumina-metal composite coating onto a carbon steel substrate by using a self-propagating high-temperature synthesis technique was demonst
An improved method with better selection capability using a single camera was presented in comparison with previous method. To improve performance, two methods were applied to landmark selection in an
The effect of the microstructure of plates fabricated both in the traditional process, involving casting, hot rolling and cold rolling (HR), and in the novel tw