【摘 要】
:
High-entropy amorphous alloys present high hardness,but low tensile ductility.Here,deformation behavior of the amorphous/crystalline FeCoCrNi high-entropy alloy
【机 构】
:
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University,Changsha
论文部分内容阅读
High-entropy amorphous alloys present high hardness,but low tensile ductility.Here,deformation behavior of the amorphous/crystalline FeCoCrNi high-entropy alloy (HEA) composite prepared by the previous experiment is investigated using atomic simulations.The result shows the partial dislocations in the crystal HEA layer,and the formation of shear bands in the amorphous HEA layer occurs after yield-ing.The strength of the amorphous/crystalline HEA composite reduces with increasing the thickness of the amorphous layer,agreeing with the previous experiments.The coupled interaction between the crystal plasticity and amorphous plasticity in amorphous/crystalline HEA composites results in a more homogeneous redistribution of plastic deformation to cause interface hardening,due to the complex stress field in the amorphous layer.The current findings provide the insight into the deformation behav-ior of the amorphous/crystalline HEA composite at the nanoscale,which are useful for optimizing the structure of the HEA composite with high strength and good plasticity.
其他文献
The occurrence and development mechanism of internal local corrosion has always been a controver-sial topic,and especially under flow conditions.In this paper,a
The fatigue properties of titanium alloy short-stems with four different lengths,manufactured by electron beam melting (EBM) technology,were investigated by in
Nanolaminates are composed of nanoscale-thick alternating layers of different materials and their properties are dependent on the individual layers,the layer th
Microstructural modifications and appropriate element doping are necessary to simultaneously enhance the electrical conductivities and reduce the lattice therma
The Mg90Ce5RE5 (RE =La,Ce,Nd) alloys were prepared by a vacuum induction furnace and their microstructure,phase transformation,thermodynamics and kinetics prope
The metallic phase of molybdenum disulfide (M-MoS2) and semiconductor phase of molybdenum disulfide (S-MoS2) was synthesized by hydrothermal method,using cetylt
We report an experimental investigation on laser ablation and associated surface structuring of CdZnTe by femtosecond Ti:Sa laser pulses (laser wavelength λ≈8
A 0.66 mm-diameter AZ31 alloy wire with ultimate tensile strength of 400 MPa and elongation of 28.5%was successfully prepared via the combination of cold-drawing
The variation of stacking fault energy (SFE) in a number of binary Cu alloys is predicted through consid-ering the Suzuki segregation by the full potential line
A dual band metamaterial absorber composed of dielectric and metallic atoms with high symmetry was numerically designed and experimentally verified.Due to simul