从首钢京唐烧结厂设计实际出发,详细介绍了京唐烧结厂节能的具体措施:采取厚料层烧结、控制原、燃料和白云石粒度、稳定烧结生产、推行低温烧结工艺、生石灰强化烧结、堵漏风、控制点火温度等一系列降低固体燃耗、电耗、煤气消耗以及水耗的措施,同时介绍了烧结余热回收措施。自2009年5月投入生产以来,生产逐步走上正轨,烧结料层厚度达780mm、固体燃耗由投产初的50.11kg/t降低到当前的42.65kg/t,取得了较好的经济效益。 Starting from the actual design of Shougang Jingtang Sinter Plant, the concrete measures of energy saving in Jingtang Sinter Plant are introduced in detail: thick layer sintering, particle size control of raw materials, fuel and dolomite, stable sintering production, low temperature sintering process, intensive lime sintering, Plugging the wind, controlling the ignition temperature and a series of measures to reduce the solid fuel consumption, electricity consumption, gas consumption and water consumption, at the same time introduced sintering waste heat recovery measures. Since it was put into production in May 2009, the production has been on the right track with the thickness of sintering material reaching 780mm. The solid fuel consumption has been reduced from 50.11kg / t at the beginning of production to 42.65kg / t at present, which has achieved good economic benefits.