Stearic acid (67.83℃) and myristic acid (52.32℃) have high melting temperatures that can limit their use as phase change material (PCM) in low temperature sol
The surface treatment of silica fume with silane coupling agent prior to incorporation in a cement mortar resulted in composites exhibiting increases in loss ta
Based on thermodynamics and kinetics, precipitation behavior of microalloyed steels was analyzed. Deformation greatly promotes isothermal carbonitride precipita
Effect of 0.1 wt pct Dy addition on microstructure and compressive behavior of NiAl-28Cr-5.8Mo-0.2 Hf eutectic alloy was investigated. The results showed that r
The effects of annealing process on the electrical conductivity and mechanical properties of Cu-Te alloys were studied via AG-10TA electronic universal machine,
TiO2 thin films were prepared with Ti2O3, Ti3O5 and TiO2 as raw materials, by electron-beam evaporation deposition, using O2- ion beam (O2 purity up to 99.99%)
The irregular surface of seeds on which gibbsites are precipitated from caustic aluminate solutions, was investigated according to the fractal theory. Two kinds
The roller movement trace for the 3D non-axisymmetric thin-walled tubes is a complex space curve. Besides the roller rotation caused by contact with the blank,
We fabricated an inorganic-polymeric photoluminescent thin film based on ZnO nanoparticles, which were grown directly in the poly(vinylpyrrolidone) (PVP) matrix