论文部分内容阅读
启动前,先将水箱冷水放掉,加入烫手热水,2～3分钟后再启动;也可以边加边放、或用热水浇油箱、柴油滤清器、高压油泵及油管和喷油器等。有条件的可在机器工作结束时,趁热放出机油,待下次启动时再将机油用水浴法(把盛装机油的容器放进开水或热水中加热)加热到70℃时再注回机油。另外,还可打开减压阀,摇转曲轴二十余次,使燃烧室温度升高,然后提高转速,立刻关闭减压阀,再猛摇几下,即可启动。以上几种方法虽然比较
Start before the first cold water tank to let go, add hot hot water, 2 to 3 minutes before starting; can also be side plus side put, or with hot water tanks, diesel filters, high pressure pumps and tubing and injectors Wait. Conditions may be in the machine at the end of the work, the release of hot oil, until the next start when the oil bath method (oil containing containers into the water or hot water heating) and then heated to 70 ℃ when the injection of oil . In addition, you can also open the valve, crankshaft crankshaft more than twenty times, so that the combustion chamber temperature, and then increase the speed, immediately close the valve, and then a few shaking, you can start. Although more than a few methods