论文部分内容阅读
天津动力机厂生产的Ⅲ号泵,缸心距为38毫米,凸轮升程为10毫米,凸轮基团为36毫米。与国际 B 系列泵相仿。适用于146、160系列柴油机。调速器结构如图一。现以红旗—100拖拉机4146AT 柴油机 BⅢ411 E—041型喷油泵为例介绍如下:首先,将中心杆往里拧,使中心杆末端螺纹进到螺母内1～2扣。一、供油开始时间的检查调整装配时,滚轮体总成高度为29.2_(-0.1)毫米,当凸轮轴凸轮在下止点时,从调整垫
Pumping machine No. Ⅲ manufactured by Tianjin Power Machinery Factory has a cylinder center distance of 38 mm, a cam lift of 10 mm and a cam base of 36 mm. Similar with the international B series pump. For 146,160 series diesel engine. Governor structure shown in Figure one. Now the red flag -100 tractor 4146AT diesel B Ⅲ 411 E-041 type injection pump as an example, as follows: First, the center rod inside screwed so that the central rod into the nut at the end of the thread 1 to 2 buckle. First, check the start time of the fuel to adjust the assembly, the roller body assembly height of 29.2 _ (- 0.1) mm, when the camshaft cam at bottom dead center, from the adjustment pad