论文部分内容阅读
我公司160t运梁车转向液压系统主要由转向缸、调压阀、转向泵、转向器和液压油箱组成。转向泵为CBN314型齿轮泵,额定压力为16MPa。该泵输出的压力油,经调压阀调整后转向系统压力降为10MPa。该运梁车在使用过程中,转向泵和转向器经常出现故障。经现场检查和分析,发现转向泵和转向器发生故障的原因主要是液压油内杂质较多。为此,我们决定在运梁车转向液压系
My company 160t beam car steering hydraulic system mainly by the steering cylinder, pressure regulating valve, steering pump, steering gear and hydraulic tank composition. Steering pump for the CBN314 gear pump, the rated pressure of 16MPa. The pump output pressure oil, the pressure regulator valve adjusted to the system pressure drop of 10MPa. The truck is in use, the steering pump and steering gear often fails. After on-site inspection and analysis, we found that the main reasons for the failure of the steering pump and the steering gear are the impurities in the hydraulic oil. To this end, we decided to turn the beam truck steering hydraulic system