Corrosion Behavior of SiCp/2024 Al Matrix Composites in 3.5 wt pct Sodium Chloride

来源 :材料科学技术学报 | 被引量 : 0次 | 上传用户:wren200
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The influences of volume fraction and particle size of SiC particulate reinforcements on the corrosion characteristics of SiCp/2024 Al metal matrix composites in aerated 3.5 wt pct NaCl aqueous solution were investigated. The electrochemical behavior was investigated by potentiodynamic polarization and electrochemical impedance spectroscopy, the general corrosion behavior of the composites was studied further by immersion tests. The results showed that pitting susceptibility was about the same for the composites and the alloy. The corrosion potentials were also independent of SiC phase. The corrosion resistance for the composites decreased as the volume fraction increased or particle size decreased.
其他文献
A new superstructure form of heat exchanger networks (HEN) is proposed based on expert system (ES).The new superstructure form is combined with the practical en
The manner by which the particles settle in the laminar flow region is first described and the characteristics of co-sedimentation of two-species particles are
The bonding of steel plate to Al-7graphite slurry was studied for the first time. The relationship model about preheat temperature of steel plate,solid fraction
The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o-diphenyltrimellitic anhydride are described.The poly(aryl amide-imide
The structure characteristics of ID precision ultrathin monocrystalline silicon section cutting machine-tool spindle with force-monitoring bearings functioning
AIM: Matrix metalloproteinase-1 (MMP-1) and tissue inhibitor of matrix metalloproteinase-1 (TIMP-1) are central to the spontaneous resolution of liver fibrosis.
An Al-50wt%TiC composite was directly synthesized by self-propagating high-temperature synthesis (SHS) technology,and then was used as a grain refining master a
In this study, Cu was added as the third additive to lower the sintering temperature of W-Ni-Fe alloy. By adding 2 wt pct Cu, a dense 93W-3.5Ni-1.5Fe-2.0Cu tung
The effect of the melt superheating temperature on the as-cast microstructure of a cast nickel-base superalloy M963 has been investigated. The results show that
In this paper, spring steel-60Si2Mn and stainless steel-1Cr18Ni9Ti were rolled one pass in the semi-solid state. The microstructural evolution during rolling of