Photodetection-induced relative timing jitter in synchronized time-lens source for coherent Raman sc

来源 :JournalofInnovativeOpticalHealthSciences | 被引量 : 0次 | 上传用户:qianxiaoping
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Synchronized time-lens source is a novel method to generate synchronized optical pulses to modelocked lasers, and has found widespread applications in coherent Raman scattering microscopy. Relative timing jitter between the mode-locked laser and the synchronized time-lens source is a key parameter for evaluating the synchronization performance of such synchronized laser systems. However, the origins of the relative timing jitter in such systems are not fully determined, which in turn prevents the experimental efforts to optimize the synchronization performance. Here, we demonstrate, through theoretical modeling and numerical simulation, that the photodetection could be one physical origin of the relative timing jitter. Comparison with relative timing jitter due to the intrinsic timing jitter of the mode-locked laser is also demonstrated, revealing different qualitative and quantitative behaviors. Based on the nature of this photodetection-induced timing jitter, we further propose several strategies to reduce the relative timing jitter. Our theoretical results will provide guidelines for optimizing synchronization performance in experiments.
其他文献
Reflectors are an essential component for on-chip integrated photonics. Here, we propose a new method for designing reflectors on the prevalent thin-film-on-insulator platform by using genetic-algorithm optimization. In simulation, the designed reflector
美国南加卅大学机械工程教授M. Modest透露:“我们想证实是否可将激光用于骨外科手术。”
期刊
期刊
期刊
本文介绍了一种新型横向剪切干涉仪的工作原理。该干涉仪使用Twyman-Green干涉仪作为分束器,光栅作为检测元件,并利用实时Moire差分法消除干涉仪的系统误差。这种干涉仪的优点在于灵敏度可调,抗振性强,易做成大口径。利用这种干涉仪检测超高音速风洞中的流场和真实火箭燃气射流,取得了一些重要结果。
倒锥透镜型光纤端系经过特殊技术加工而成。本文用二阶统计相关函数,采用单色相干光源,计算了倒锥透镜型光纤端的光场分布及其统计相关性质,并与平端的情况作了对比。在实验上,用He-Ne激光作为单色相干光源,对理论进行了验证。
本文报导双脉冲氯化铜激光器的参量研究。研究了各种变量对激光能量密度以及对两个放电脉冲间的三个特性时间间隔(最小、最大和最佳延迟时间)的影响。所研究的几何变量包括管子直径,从2.3到40亳米,以及管子长度,从3到60厘米。研究了在0.5~50乇压力下的缓冲气体氦、氖和氩,管子温度在270~500 ℃之间变化。分解和泵浦脉冲两者的能量密度和电压独立变化,从8.5千伏,不到1亳焦耳/厘米3至20千伏超过500亳焦耳/厘米3。发现达到最大激光能量密度的最佳条件是氖压20乇,10亳米直径、30厘米管长、温度为400
期刊
With the development of high power ultrafast laser passively mode-locked by a semiconductor saturable absorber mirror (SESAM), the damage threshold and degeneration mechanism of the SESAM become more and more important. One way to reduce the maximum elect
美国国际商业机械公司的研究人员已经将光学集成回路与表面声波技术结合在一个器件中,从而使他们在由很小的底板上得到一个完整的光通讯系统组件的工作上前进了一大步。该公司制造的器件是一种能用作光信号开关的调制器。
期刊