设备维修时,常遇到要拆卸滑动轴承和轴套的工作。由于轴承和轴套与箱体或壳体的配合都是过盈配合,拆卸比较困难。为此,本文介绍几种拆卸轴承和轴套的简单新方法。(1)用顶杆和锥销拆卸如图1所示,按轴承内径配车1个顶杆,在顶杆的一端钻或车出一个锥孔或直 Equipment maintenance, often encountered to remove the sliding bearing and sleeve work. As the bearings and bushings with the box or housing are interference fit, disassembly more difficult. For this reason, this article describes several simple new ways to remove bearings and bushings. (1) demolition with the top rod and cone pin Shown in Figure 1, according to the inner diameter of the bearing with a mandrel, drill or car at the end of a tapered hole or straight