Hazardous waste dechlofination reduces the potential of creating dioxins during the incineration process.To investigate the salt effect on waste dechlofination,molten hydroxides with a low melting temperature were utilized for the pre-dechlorination and decomposition of chlorine-containing organic wastes (COWs) including trichlorobenzene (TCB),perchloroethylene,hexachlorobenzene and chlordane.The results showed that a eutectic mixture of caustic sodium and potassium hydroxides (41 wt.％ NaOH and 59 wt.％ KOH) led to a low melting point below 300℃ and a relatively high chlorine retention efficiency (CRE) with TCB as a representative COWs.The amounts of hydroxides,reaction time,and temperature all had notable influence on CRE.When the mass ratio of hydroxides to TCB reached 30∶1,approximately 98.1％ of the TCB was destroyed within 2.5 hr at 300℃ with CRE of 71.6％.According to the residue analysis,the shapes of reaction residues were irregular with particles becoming swollen and porous.The benzene ring and C-Cl bonds disappeared,while carboxyl groups formed in the residues.The stripped chlorine was retained and condensed to form chloride salts,and the relative abundance of the chloride ions associated with the mass of TCB in residues increased from 0 to 75.0％ within the 2.5 hr reaction time.The observed concentration of dioxins in residues was 5.6 ngTEQ/kg.A reaction pathway and possible additional reactions that occur in this dechlofination system were proposed.Oxidizing agents may attack TCB and facilitate hydrogenafion/dechlofinafion reactions,making this process a promising and environmentally friendly approach for chlorine-containing organic waste treatment.