关于锰矿中钙镁络合滴定的几个问题讨论

来源 :理化检验.化学分册 | 被引量 : 0次 | 上传用户:zzq19870114
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
本文进一步研究了锰矿中钙镁的络合测定,通过试验讨论了关于“铜试剂-钽试剂-四氯化碳”排除干扰的问题,以及利用钙电极探讨直接测定镁时应用EGTA 作为钙的掩蔽剂的问题。一试剂与仪器PHS-2型酸度计282型甘汞电极钙电极:泰县无线电厂铜试剂:30%水溶液,现配现用钽试剂:5%乙醇溶液。K-B 毒旨示剂:称取0.1克酸性铬兰K,0.15克奈酚绿 B,20克硫酸钾,充分研成粉末。CMC:1%,称1克羧基甲基纤维索纳,溶于100ml热水中。 In this paper, the complexation determination of calcium and magnesium in manganese ore is further studied. The problems of eliminating the interference with “copper reagent - tantalum reagent - carbon tetrachloride ” are discussed through experiments and the use of calcium electrode to explore the direct application of EGTA as calcium Masking agent problem. A reagent and instrument PHS-2-type acidity meter calomel 282 electrode Calcium electrode: Taixian Radio Factory Copper reagent: 30% aqueous solution, now with active tantalum reagent: 5% ethanol solution. K-B poison indications: Weigh 0.1 grams of acid Chromium K, 0.15 grams of Naeba Green B, 20 grams of potassium sulfate, fully ground into powder. CMC: 1%, said 1 gram carboxyl methyl fiber Sonar, dissolved in 100ml hot water.
其他文献
铁矿试样以过氧化钠熔融,用六次甲基四胺分离铁、铝、钛、钒等干扰元素后,在pH9左右,用铜试剂分离铜、锰、锌、铅等元素,在pH>12时,用EGTA滴定CaO。于另一份溶液中,在pH10加
采用压印连接方法实现3层异种金属板料的连接,并通过试验研究板材配置形式对3层板压印接头机械性能的影响。分别对3种配置形式的拉伸-剪切试件和剥离试件进行强度测试。试验
针对海洋石油平台用SM490YB热轧H型钢冲击性能偏低的问题,通过分析找出冲击性能偏低的主要影响因素为钢中存在一定量的魏氏组织和少量的带状组织,并对微合金化、炼钢、加热、