【摘 要】
：
Compared with the traditional image intensifier with phosphor screen readout, the photon-counting imaging detector with charge induction readout is more beneficial in several aspects (e.g., good imaging properties and time resolution) to astronomy, reconn
【机 构】
：
StateKeyLaboratoryofTransientOpticsandPhotonics,Xi’anInstituteofOpticsandPrecisionMechanics,ChineseA
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
Compared with the traditional image intensifier with phosphor screen readout, the photon-counting imaging detector with charge induction readout is more beneficial in several aspects (e.g., good imaging properties and time resolution) to astronomy, reconnaissance, bioluminescence, and materials research. However, the annealing temperature during the tube-making process can affect the properties of the Ge film, and consequently impair the performance of the detector. Therefore, the influence of annealing temperature on Ge film and on the detector is studied in order to determine the crucial parameters. The Ge films are prepared on ceramic and quartz glass by the use of an electron gun. They are analyzed by scanning electron microscope (SEM), high-resistance meter, and X-ray diffraction (XRD). The results show that the optimum substrate and annealing temperature are ceramic plate and 250 ℃, respectively.
其他文献
Random distributed feedback Raman fiber laser is a convenient method to generate laser without using cavity mirrors. We show for the first time to the best of our knowledge a 10-W-level random fiber laser operated at 1178 and 1212 nm (1.2-μm range). The p
针对光纤布拉格光栅(FBG)传感网络畸变光谱难以解调的问题,在超高斯光谱函数的基础上构造畸变光谱的理论函数,将畸变FBG传感网络光谱的解调问题转化为函数优化问题,提出了基于分布式估计算法的波长解调技术,并对已发生畸变的FBG传感网络进行解调实验。结果表明:分布式估计算法解调算法不仅能够在光谱畸变情况下保持较高的解调精度,其平均误差控制在1 pm以内,而且能够对光谱畸变的程度作出定量估计。与传统峰值检测解调技术相比,该方法解决了FBG传感网络畸变光谱波长难以解调的问题,为延长FBG传感网络使用寿命提供了新的
高帧频红外焦平面探测器在红外武器系统、光谱成像和高速测温中有着重要应用。目前,我国高帧频红外焦平面技术还比较落后,这严重制约着我国高端红外武器装备、光谱成像技术、高速测温仪器的发展。针对高帧频红外成像应用,设计并流片加工了一款384×288面阵、像元间距为25 μm的数字读出电路,与长波HgCdTe红外探测器芯片进行倒装互连,形成混合探测器芯片,并封装于金属真空杜瓦中,再配置斯特林制冷机,成功研制出了高帧频384×288长波数字红外探测器组件。经测试,所研制器件最高帧频达到1012 Hz,噪声等效温差(N
计算了气体类透镜效应造成TEACO2激光器纵模频率间隔的变化,讨论了由此引起的锁模效果.流动工作物质或在混合气体中加入较大量的氦气体,减弱类透镜效应,有可能得到较窄的锁模光脉冲;采用适当共振腔结构,也能够改善锁模稳定性.
计算关联成像是利用成像物体的反射或透射信号与结构化的参考光进行多次关联成像,具有了灵敏度高、抗干扰能力强等优点。当物体和计算关联成像系统存在相对运动时,在成像过程中物体的反射或透射信号与参考光的光场涨落失去关联性,进而会产生运动模糊。从二阶关联函数的角度推导了运动成像导致模糊的原因以及追踪补偿原理;恢复计算关联成像系统中参考光和桶探测器收集的光强值的关联性,实现了计算关联成像中的追踪补偿策略;计算
现有盲道分割算法是通过提取颜色或纹理特征,采用聚类等方法来进行分割,易受盲道类型和外部环境影响。针对此问题,从盲道整体特征进行考虑,引入学习的方式,提出了一种基于显著性检测和改进投影字典对学习的盲道分割方法。该方法首先利用显著性检测,对盲道区域进行粗定位;然后以图像块作为处理单元,通过所提出的稳健字典对学习算法进行字典学习;接着将粗定位后的图像分块在该字典上进行稀疏重构;最后按照重构误差进行分类,
Exciton-polaritons offer an exceptional platform for future photoelectronic and quantum information applications. The influence of the optical Stark effect on exciton-polaritons in a microcavity embodied with a monolayer WS2 is studied. A polar
氦-锶和氦-钙混合气体激光器是具有平均功率0.5~1瓦级的方便短波（分别为373.7和430.5毫微米)辐射源。从这类激光器的实用观点来看，进一步增加它的平均输出功率和脉冲功率已成为重要任务。无论是给激活体积增大输入能量和提高重复频率，还是借助于增加本身的激活体积都能解决这个问题。因为这类激光器是自热型的，所以用第一种方法提高输出功率至少需要采取措施消除剩余热量，此举常常导致激光器激活元件结构的复杂化。第二种方法似乎比较简单,为此，研究利用增加其激活长度增加He-Sr激光器输出功率的可能性就成为本文的目的
The average power of fiber lasers has been scaled deeply into the kW regime in the past years. However, stimulated Raman scattering (SRS) is still a major factor limiting further power scaling. Here, we have demonstrated for the first time, to the best of