论文部分内容阅读
在电解车间,更换阳极的传统方法是:电解槽维护人员在换旧阳极前,对旧阳极的高度利川电解槽水平母线做参考进行手工划线标定,待拔取旧阳极后再利用标尺测得旧阳极的底掌到上述的标定线的距离。利用这一测得的距离,再通过对应电解槽水平母线做参考对新阳极进行定位。该定位方法需要人工介入,同时对热态的旧阳极进行人工标定有很大危险性。
In the electrolysis plant, the traditional method of replacing the anode is: cell maintenance staff in the replacement of the anode, the anode height of the old anode tank Icheon electrolysis cell reference to do manual scribing calibration, to be pulled after the old anode and then use the scale measured old The distance between the bottom of the anode and the above calibration line. Using this measured distance, the new anode is positioned by reference to the cell horizontal bus. This positioning method requires manual intervention, while manual calibration of the hot old anode is very dangerous.