论文部分内容阅读
基于铝模的内迫式套管技术研究
【机 构】
:
成都建工第八建筑工程有限公司 成都 610037
【出 处】
:
建筑工程技术与设计
【发表日期】
:
2021年29期
其他文献
在实际运行过程中,乙二醇单叔丁基醚(ETB)装置产品收率较低,设计为45%,实际仅为36%.在装置满负荷情况下,由于高附加值产品产量少,导致效益核算加工每t原料亏损约44元左右,即日
The paper proposes a novel multi-legged robot with pitch adjustive units aiming at obstacle surmounting.With only 6 degrees of freedom,the robot with 16 mechanical legs walks steadily and surmounts the obstacles on the complex terrain.The leg unit with ad
介绍了有机硅改进乙丙橡胶的方法,具体包括化学方法、物理方法等.结合有机硅材料和乙丙橡胶的优点,分析了有机硅改性乙丙橡胶技术研究现状,对比了乙烯基硅橡胶、硅树脂和官能
越来越多的厂房采用钢结构进行搭建和安装,人们对大型钢结构厂房的安装精度控制要求也越来越高,为确保大型钢结构厂房在施工和安装精度、质量等方面的达标,对大型钢结构厂房安装精度的控制方法和措施进行了简要的探究和分析。钢结构运输过程及现场安装分别进行精度控制,不断优化钢结构厂房的性能。
Multi-Scale Convolutional Gated Recurrent Unit Networks for Tool Wear Prediction in Smart Manufactur
As an integrated application of modern information technologies and artificial intelligence,Prognostic and Health Management(PHM)is important for machine health monitoring.Prediction of tool wear is one of the symbolic applications of PHM technology in mo
Sparse Autoencoder-based Multi-head Deep Neural Networks for Machinery Fault Diagnostics with Detect
Supervised fault diagnosis typically assumes that all the types of machinery failures are known.However,in practice unknown types of defect,i.e.,novelties,may occur,whose detection is a challenging task.In this paper,a novel fault diagnostic method is dev
As a starting point in equipment manufacturing,sawing plays an important role in industrial production.Intelligent manufacturing equipment is an important carrier of intelligent manufacturing technologies.Due to the backwardness of intelligent technology,
Environmental perception is one of the key technologies to realize autonomous vehicles.Autonomous vehicles are often equipped with multiple sensors to form a multi-source environmental perception system.Those sensors are very sensitive to light or backgro