【摘 要】
：
A novel three-component hybrid-integrated optical accelerometer based on LiNbO3 photoelastic waveguide is presented. The photoelasitcity of LiNbO3 due to three-dimensional stress states is obtained analytically. We analyze the level of sensitivity to cros
【机 构】
：
FacultyofMechanicalandElectronicEngineering,SouthwestPetroleumUniversity,KeyLaboratoryofPetroleum-Ga
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
A novel three-component hybrid-integrated optical accelerometer based on LiNbO3 photoelastic waveguide is presented. The photoelasitcity of LiNbO3 due to three-dimensional stress states is obtained analytically. We analyze the level of sensitivity to cross-axis accelerations which is a very important parameter for three-component accelerometer. Theoretically, the designed three-component hybrid-integrated optical accelerometer has a transverse sensitivity ratio (TSR) of zero. The sensor has a high natural frequency of 3.5 kHz and a linear broad working frequency.
其他文献
采用延迟器与旋光器的串联模型, 研究磁场中双折射光纤的偏振传输特性, 将它们的琼斯矩阵按照两种不同的顺序级联相乘, 导出了两种等效模型中等效相位延迟量、等效快轴方向和等效旋光角的解析表达式。研究发现, 当光纤同时具有线双折射和圆双折射时, 单位长度的等效相位延迟量并不等于其固有的线双折射, 等效旋光角也不等于其法拉第旋转角, 它们同时都与光纤的固有线双折射和磁场引起的圆双折射相关联。且在不同级联顺序的两种等效模型中, 等效相位延迟器的快轴方向都不与光纤的双折射主轴重合, 而是分别向两个相反的方向偏移一定的
We fabricate low threshold current monolithic distributed feedback (DFB) laser with a multi-mode interface (MMI) combiner using butt-joint metal-organic chemical vapor deposition technology with different waveguide structures. Multi-layer mask self-aligne
Laser skin perforation is an effective and promising technique for use in blood collection. In this study, the relation between the perforation profile of skin and laser irradiation at various energies is discussed. Increasing laser energy does not unifor
In this study, a quaternary blending strategy was applied in the fabrication of organic photovoltaic devices and large-area modules. As a result, the ultimate quaternary organic solar cells (OSCs) deliver 16.71% efficiency for small-area devices and 13.25
为了研究激光技术焊接块体非晶合金的可行性,采用激光焊接块体非晶合金Zr45Cu48Al7。当焊接速度为8m/min、激光输出功率为1.2kW时,焊缝和热影响区均保持了非晶特性,且没有发现裂纹等的缺陷;试样的热循环温度曲线分析表明,焊缝和热影响区急速从熔点冷却到430℃以下是该试样保持非晶的原因。结果表明,采用激光焊接技术可以成功连接块体非晶合金。
简要介绍了实验室中使用的三种透射光栅的结构。在北京同步辐射源上实验标定了这些光栅的相对衍射效率。借助于光栅模型，得到了光栅的重要结构参数，并对光栅的绝对衍射效率进行了模拟计算和讨论。
In this paper, the positive influence of apodization weighting method on frequency characteristics of surface acoustic wave (SAW) temperature sensor is investigated. Simulation and experiment results show that side lobe suppression abilities of the sensor
美帝贝耳电话实验室的杜圭(M. A. Duguay)和汉森（J. W. Hansen)已取得连续运转激光器的最大光频移动，这是迄今电-技术所未能作到的事情。他们成功地获得了连续运转激光器的精密光频调谐，范围达±45千兆赫。尽管其它技术也能在较大范围内获得调谐移动，但这种方法的特点却在于能获得连续脉冲激光束的频移，且调节的精度极高。这种技术的一种应用可能是制造激光多路通讯系统。另一种应用可能是进行复谐振实验，以便探讨物质中的原子、分子质点的性质和构成。
用ESB方法研究了六种激光染料的光解性质,观察到自由基和染料三重态,并测量了在77K时三重态的寿命,最后讨论了实验结果.
为了解决10 m气步枪运动员日常训练中需要消耗大量子弹和靶纸的问题, 使用LabVIEW设计了一套基于图像处理技术的激光模拟射击自动报靶系统。此系统在10 m气步枪基础上加装扳机压力传感器、蓝牙模块、激光器等, 使用激光束代替实弹, 使用摄像头模块捕捉靶纸上的光斑图像并传输给计算机程序, 利用LabVIEW程序的图像处理函数进行处理得出瞄准轨迹、扳机压力曲线和环数成绩等提供给教练及运动员查看分析。相比与传统的人工判靶, 该系统除了解决训练中消耗大量子弹和靶纸的问题, 还在报靶的效率、精度、公平性等方面具有