通过预加氢系统的催化剂装填、开工过程、开工前后精制油指标对比等方面对RS-30(S)催化剂进行评价。结果表明RS-30(S)催化剂加氢脱硫、脱氮活性较高,在反应器入口温度为280℃、高分压力为2.8MPa、氢油体积比为90v/v、体积空速为3h-1的条件下,可以原料油精制得到硫含量、氮含量均小于0.5 ppm的预加氢精制油,完全能够满足永坪炼油厂连续重整装置预加氢单元满负荷生产的需要。 The catalysts of RS-30 (S) were evaluated in terms of catalyst loading, start-up process and contrast of refined oil before and after start-up. The results show that the RS-30 (S) catalyst has high hydrodesulfurization and denitrification activity. When the inlet temperature of the reactor is 280 ℃, the high pressure is 2.8MPa, the volume ratio of hydrogen to oil is 90v / v, the space velocity is 3h- 1 conditions, the crude oil can be refined to obtain sulfur content, nitrogen content of less than 0.5 ppm of pre-hydrotreated oil, fully meet the Yongping refinery continuous reformer pre-hydrogenation unit at full capacity needs.