葡萄快速育苗法——水催根

来源 :农业科学实验 | 被引量 : 0次 | 上传用户:Andylinzc
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
今年6月4日做个小实验,利用从盆栽葡萄上剪下的15个蔓放在罐头瓶里进行水催根,12天后有13条出根,两条未出根,因为这两条只有当年生蔓下端未带二年生蔓。下边介绍一下操作方法:1.先洗好罐头瓶,放多半瓶水,把剪下的葡萄蔓放在里边。剪取当年生蔓下端要一节或两节二年生蔓。上边说有两条蔓未出根,就是未带二年生蔓。2.封好瓶口,取牛皮纸或塑料布,剪成圆形,并剪一口至圆心,把葡萄蔓夹在剪口中间,再 June 4 this year to be a small experiment, the use of plants cut from the potted plants 15 cans of water in the cans for the root, 12 days after the root out of 13, the two not out of roots, because these two only Man year did not take place with two biennial vine. Here to introduce the method of operation: 1. First wash the canned bottle, put more than half a bottle of water, cut the vine on the inside. To cut off the end of the year to take a vine or two biennial vine. There are two above said that the vine is not out of roots, that is, with two years without vine. 2. Seal the bottle, take kraft paper or plastic sheeting, cut into a circle, and cut to the center of the circle, the grapes vine clip in the middle of the cut, and then
其他文献
为了研究折流燃烧室的间接点火过程,对三种不同初始火核位置的燃烧室进行大涡模拟计算,并结合燃烧室点火试验和性能试验进行验证.研究结果表明:折流燃烧室的主燃区可分为三个
为了在苹果上推广应用三十烷醇,我们在1982和1983年进行了试验,取得了明显效果,现总结报告如下。一、材料与方法 1.地点:试验地点在陕县张村公社水淆大队果园。该园每年施基
为开展单凹腔驻涡燃烧室值班油气匹配思路研究,采用试验研究方法,在燃烧室进口压力、温度以及马赫数分别为0.101MPa,487K,0.25,燃料为航空煤油的条件下开展试验.试验中主要研
(一)形态特征与习性:金边瑞香属瑞香科,系常绿小灌木。叶互生,长椭园形,长约5—8cm;表面深绿色,全缘,叶缘具有金黄色。花极清香,2—3月间开放。头状花序,有总梗,密生,紫红色
为研究螺旋爆轰胞格结构,选取预混气C2H2+2.5O2+85%Ar,C2H2+2.5O2+70%Ar与C2H2+5N2O在光滑管中进行爆轰实验,使用烟膜记录管道侧壁与端面胞格结构.编写MATLAB程序处理烟膜记录,
果树定植是将合格出圃的果苗(一般2至3年生苗),按照一定规格栽植于规划好的园地中的工作。果树定植是水果生产技术中的第一道工序,对以后的生产关系重大。因此,在工作中,要
利用冲击/发散双层壁冷却结构可以有效加强冷却效果.针对加力燃烧室隔热屏高效冷却性能的发展要求,基于综合冷却效率模化理论和匹配原则,采用红外测温技术测量了加力燃烧室双