论文部分内容阅读
1 等离子割炬的保养1.1 正确地装配割炬正确、仔细地安装割炬,确保所有零件配合良好,确保气体及冷却气流通.安装前,将所有的部件放在干净的绒布上,避免脏物粘到部件上.在O型环上加适当的润滑油,以O型环变亮为准,不可多加.1.2 消耗件在完全损坏前要及时更换消耗件不要用到完全损坏后再更换,因为严重磨损的电极、喷嘴和涡流环将产生不可控制的等离子弧,极易造成割矩的严重损坏.所以当第一次发现切割质量下降时,就应该及时检查消耗件.1.3 清洗割炬的连结螺纹
1 Plasma torch maintenance 1.1 Correct assembly of the torch Correctly and carefully install the torch to ensure that all parts work well to ensure that the gas and cooling air circulation. Before installation, all the parts on a clean cloth to avoid dirt Stick to the parts in the O-ring with the appropriate oil to O-ring brightening prevail, not too much .1.2 consumable parts in a timely manner before the complete replacement of consumables do not use completely damaged before replacement, because Severe wear and tear of the electrodes, nozzles and eddy current ring will produce uncontrollable plasma arc, can easily lead to serious damage to the cutting torque, so when the cutting quality decline for the first time, you should promptly check the consumables.1.3 Links to clean the torch Thread