【摘 要】
：
In this paper, a holographic storage scheme for multimedia data storage and retrieval based on the digital signal processing (DSP) is designed. A communication model for holographic storage system is obtained on the analogy of traditional communication sy
【机 构】
：
CollegeofElectronicInformation,BeijingUniversityofTechnology,Beijing100022CollegeofAppliedSciences,B
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
In this paper, a holographic storage scheme for multimedia data storage and retrieval based on the digital signal processing (DSP) is designed. A communication model for holographic storage system is obtained on the analogy of traditional communication system. Many characteristics of holographic storage are embodied in the communication model. Then some new methods of DSP including two-dimensional (2-D) shifting interleaving, encoding and decoding of modulation-array (MA) code and method of soft-decision, etc. are proposed and employed in the system. From the results of experiments it can be seen that those measures can effectively reduce the influence of noise. A segment of multimedia data, including video and audio data, is retrieved successfully after holographic storage by using those techniques.
其他文献
A method to shape the incident laser beam into a concentric multi-ring pattern with different intensity distribution is presented based on geometrical transform method and energy conservation. The output two and three rings are designed as examples to ver
A fused silica glass micro-channel can be formed by chemical etching after femtosecond laser irradiation, and the successful etching probability is only 48%. In order to improve the micro-channel fabrication success probability, the method of processing a
采用脉冲激光沉积法, 室温条件下在透明导电玻璃衬底上制备了Bi3.95Er0.05Ti3O12(BErT)薄膜。研究结果表明, 低沉积氧气压下制备的BErT薄膜表面致密, 平整无裂缝, 且呈非晶结构; 当沉积氧气压为3 Pa时, BErT薄膜厚度约为180 nm, 表现出优秀的介电性能, 即当测试频率为1 kHz时, 室温介电常数为52, 介电损耗为0.025。同时, BErT薄膜的介电性能随频率、电压和温度的变化比较稳定, 在可见光区间具有较高的透过率。
提出了一种借助于单个特征点的异步视觉自主测高方法。所提方法将内外参分离标定, 计算效率高。在构建的6自由度飞行模拟装置上对该方法进行了验证, 结果表明：当测试高度在2 m以内时, 测量的绝对误差小于0.02 m, 相对误差优于1.5%。该方法对计算负载的要求低, 特别适用于机上快速解算的应用场合, 也可拓展至对地目标定位的测量应用中。
研究了一种利用图形处理单元(GPU)加速数字全息图再现的算法。该算法充分利用GPU强大的并行计算能力, 有效地缩短了数字全息图再现时间。比较了GPU加速运算和中央处理器(CPU)独立运算两种模式下, 两种不同尺寸的数字全息图再现时间。结果表明, 对于大小为2048 pixel×2048 pixel的数字全息图, GPU算法的再现时间可缩短至约1/15。利用该算法编写了易操作的通用软件。在高配置主机和高性能GPU硬件环境下, 该软件不仅能够满足诸如数字全息显示、数字全息显微等系统实时功能的要求, 还能够指导
为了准确测量神光II装置多波长高功率的激光能量,研制了七种规格的体吸收激光能量计,经中国计量院 测试标定,其灵敏度、均匀性及稳定性等技术参数超过原设计指标的要求, 达到或超过美国阿波罗激光器公司制造 的同类型激光能量计的水平,满足了神光II装置多波长髙功率激光能量测量的需要。分析了神光II装置中三种波 长激光能量测量的取样方式及测量精度。
In this paper, the first- and second-order polarization mode dispersion (PMD) with the amount of 132.994-ps differential group-delay (DGD) and maximum 476.129-ps/nm second-order PMD can be compensated by a two-stages PMD compensator at a 40-Gb/s optical f
全息照相越来越为人们所了解，它能很好地解决建筑、医学以及机械工程等各种领域里的问题。
The method of fitting damage probability curves of laser-induced damage is introduced to investigate the laser-conditioning mechanism of ZrO2/SiO2 high re°ection (HR) films. The laser-induced damage thresholds (LIDTs) of the sample are tested before and a