10CrNi3Mo钢的低温韧性研究

来源 :热加工工艺 | 被引量 : 0次 | 上传用户:wdelaopologo
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
通过组织观察、系列温度冲击和断口形貌等方法对10CrNi3Mo钢的低温韧性进行研究。根据系列冲击试验的能量判据、断口判据和塑性判据得出了韧-脆转变温度在-100℃以下。采用动态撕裂试验,试验结果表明,动态撕裂试验与系列冲击趋势相同,韧-脆转变温度约为-75℃。经综合研究可知,10CrNi3Mo钢具有良好的低温韧性。 The low temperature toughness of 10CrNi3Mo steel was studied by means of microstructure observation, series of temperature impact and fracture morphology. According to the energy criterion, fracture criterion and plastic criterion of series impact test, the ductile-brittle transition temperature is below -100 ℃. Dynamic tear test, the test results show that the dynamic tear test and the impact of the same series of trends, ductile - brittle transition temperature of about -75 ℃. The comprehensive study shows that, 10CrNi3Mo steel has good low temperature toughness.
其他文献
期刊
期刊
期刊
目的 观察胸腰段脊柱骨折前路内固定术后对症护理的效果.方法 2007年10月至2009年2月康辉内固定系统对38例胸腰段脊柱骨折前路内固定术,护理引流管过程中,加强了胸腔闭式引流
研究了NiAl-Mo合金在1100℃下暴露时间为1h的氧化行为,利用扫描电子显微镜(SEM)、能量衍射谱(EDS)和X射线衍射等手段观察分析了氧化层的表面形貌、微观组织结构成分,并结合氧
期刊