【摘 要】
：
Hongtoushan copper mine was studied by analyzing the type of heat source,the calculation method about thermal releasing in stope, thermal transfer between rock and air, distribution of temperature in stope were formulated. With CFD (Computational Fluid Dy
【机 构】
：
School of Resources and Civil Engineering, Northeastern University, Shenyang 110004, China
论文部分内容阅读
Hongtoushan copper mine was studied by analyzing the type of heat source,the calculation method about thermal releasing in stope, thermal transfer between rock and air, distribution of temperature in stope were formulated. With CFD (Computational Fluid Dynamics, DFD) simulation and Fluent software, geometrical model of a stope was built, boundary conditions was initialized, then the temperature distribution, velocity and pressure field, concentration of oxygen and CO2 of air were simulated. In order to validate the simulation result, the parameters of the stope were measured with meter, and comparing with the data of simulation. The result shows that the data of measuring and simulating are compatible. According to the distribution of temperature and velocity, some ways such as flow angle and flow velocity are put forward, simulation and parameter optimization made also, a satisfied result is acquired. The conclusion can be used on ventilation designing and stope improving.
其他文献
The danger degree evaluation of coal and gas outburst is mainly evaluating spot risk using the safety examination table and the evaluation value can be found. According to factors influence coal and gas outburst majorth were qualitative or fuzzy similar f
It is the rational and exact computation of the safety economy contribution rate that has the far-reaching realistic meaning to the improvement of society cognition to safety and the investment to the nation safety and the national macro-safety decision-m
Based on the theory of attribute identification, a weight-variable identification model was put forward on top coal caving effect in fully mechanized top coal caving face.Contribution value of all kinds of evaluation factor of the caving coal and waste we
The engaged feature of a pair of gears was determined by the geometrical characteristics of their tooth surfaces. Through an analysis of gearing theory on epicycloidal bevel gears, the method to examine if there exists undercut during manufacturing of epi
In order to ensure the lift can go up and down steadily and safely, a cycloconverter based on fuzzy control algorithm for lift was introduced, which can keep the output voltage to be symmetric sine wave. In this cycloconverter system,the main circuit stru
To solve the issues of calculating gas loss quantity during sampling, simulated gas desorption process of the consumingly destruct coal with the assembly simulation testing device. Through an analysis of the simulation test datum using SPSS software,estab
In order to study the temperature distribution of deep field, mathematical models of temperature field in field and surrounding rock were built based on heat transfer and seepage theory. Combined test data with mathematical model, the temperature distribu
With the unceasing appearance and widespread application of new surveying technology, the present age mining survey has meet huge change. However, lots of problems occurred while using the new techniques since the number of mine is large in China and cond
Using visual experimental apparatus,one system(T40,1×10-3 mol/L,nonadded with coal)and another system(T40,2×10-3 mol/L,added with coal)were experimented with for three times and two times.respectively.Five groups of P-T experimental parameters were obtain
Based on the two temporal TM images of 1995 and 2001 of one coal mining area, analyzed the variety information of the coal mining area. Relative registration were done with the two images firstly, then cut out the study area for experimental data, classif