Characteristics and electrochemical performance of cathode material Co-coated LiNiO2 for Li-ion batt

来源 :中国有色金属学会会刊:英文版 | 被引量 : 0次 | 上传用户:chcyu
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
球形的 Ni (哦) 与公司涂的 _2 粉末(哦)_2 作为原料是混合 withLiOH 综合为由使用的锂离子电池的阴极材料固态反应。在在 600 deg C 上面的温度的 Aftersintered,有层结构的一个稳固的答案被形成。它是有在表面的更高的钴内容的浓度梯度材料的 XPS 表演的 Theresult ,和坡度与从 650~750 deg C.This 新坡度材料增加 sintering 温度减少,叫的同样公司涂的 LiMO_2 ,与 LiNiO_2 和公司涂的 LiNiO_2 的共同做的
其他文献
<正>One-pass asymmetric hot extrusion performed at 673 K was applied to fabricate an AZ31 magnesium alloy sheet.Finite element method(FEM) was used to model the
<正>Aluminum films with thickness of 8.78-20.82μm were deposited on the AZ31B magnesium alloys by DC magnetron sputtering.The influences of aluminum film on th
Aluminum matrix composites reinforced with carbon nanotube were fabricated by a powder metallurgy method. The effects of carbon nanotube content on the relative
Ni-20Cr powders mixed with tungsten,aluminum,titanium,and different contents of molybdenum disulfides were hot-pressed in graphite mould by powder metallurgy me
AZ31B 镁合金表的 Superplastic 变丑机制被调查。216% 的最大的延伸和 0.36 的紧张率敏感是获得的 at723 K 和 1 X l0~ 的紧张率(-3)s~(-1) 。动态再结晶发生在早变丑阶段,这
<正>Corrosion behavior of AZ91 magnesium alloy in simulating acid rain under wet-dry cyclic condition was investigated.The results show that corrosion potential
The nano-TiO2 doped with Er3+ were prepared from Ti(OC4H9)4 by sol-gel method,and the effect of Er3+ dopant on microstructure and photocatalytic activity of nan