Polychlorinated dibenzo-p-dioxins and dibenzofurans in flue gas emissions from municipal solid waste

来源 :浙大学报(英文版)(A辑:应用物理和工程) | 被引量 : 0次 | 上传用户:MagicStone2005
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Polychlorinated dibenzo-p-dioxins and furalls(PCDD/Fs)emissions in flue gas from two types of municipal solid waste incinerators(MSWIs)most commonly used in China were investigated in this study.The selected incinerators include two grate-type MSWIs:MSWl-A(350 t/d)and MSWI-B(150 t/d),and two fluidized bed MSWIs:MSWI-C(400 t/d) and MSWI-D (400 t/d),which are all equipped with semi-dry lime scrubber and bag filter except MSWI-D equipped with cyclone and wet scrubber(WS)as air pollutant conffol device(APCD).Results indicated that the emission concentration and the international toxic equivalents(I-TEQs)of the PCDD/Fs from the stacks were in the range of 1.210~10.273 ng/Nm3 and 0.019~0.201 ngI-TEQ/Nm3,respectively.They were greatly lower than the emission regulation standard of PCDD/FS in China(1.0 ng I-TEQ/Nm3).However,only the PCDD/Fs emission Ievel from MSWI-C Was below 0.1 ng I-TEQ/Nm3.Although the homologue profiles were distinct,the contributions of the 2,3,7,8-subsituted congenem to the total I-TEQ were similar among all the investigated MSWIs.Two major 2,3,7,8-substituted congeners,2,3,4,7,8-PeCDF and 1,2,3,7,8-PeCDD,account for 47% and 9%(average values)of the total I-TEQ values,respectively.The correlation between PCDD/Fs levels and composition of flue gas Was also discussed.
其他文献
依托某危险废物焚烧炉(50 t·d-1)开发了一套硫基循环抑制及飞灰低温热处置联用控制二英排放的中试平台,研究了该系统对硫基的循环累积能力及对烟气中二英合成的抑制能力。系统
In this work,polypropylene(PP)/polystyrene(PS)blends with different organoclay concentrations were prepared via melt compounding.Differing from the results of p
采用柠檬酸络合浸渍法制备了负载型钙钛矿氧化物 La 1-x Cex CoO3/ CeO2(x =0~0.3)催化剂,考察了不同 Ce 掺杂量对其催化氧化 NO 和抗硫性能的影响,并运用 X 射线衍射(XRD)、傅
在声波团聚室中研究了润湿剂液滴与细颗粒碰撞团聚脱除特性,提出了一种利用润湿剂促进细颗粒在声波场中捕集的新方法。结果表明,不同润湿剂溶液对细颗粒在声波场中的团聚脱除效
A model describing the absorption process of SO2 into limestone slurry with a spray scrubber is presented.Both the physical performance of the spray liquid in t
Due to the importance of biological safety in drinking water quality and the disadvantages which exist in traditional methods of detecting typical microorganism
Factors such as errors during the fabrication or construction of structural components and errors of calculation assumption or calculation methods,are very like