论文部分内容阅读
1 石硫合剂的成份石硫合剂有强碱性、腐蚀性,其有效成分是多硫化钙(CaS.Sx)。石硫合剂具有强烈的臭鸡蛋气味,性质不稳定,易被空气中的氧气、二氧化碳分解。一般来说,石硫合剂不耐长期贮存。2石硫合剂配制方法和步骤石硫合剂是用生石灰、硫磺粉熬制而成的红褐色透明液体。配方与选料:按照生石灰1份、硫磺粉2份、水10粉的比例配制,生石灰最好选用较纯净的白色块状灰,硫磺以粉状为宜。2.1把硫磺粉先用少量水调成糊状的硫磺浆,搅拌越匀越好。2.2把生石灰放入铁桶中,用少量水将其溶解开(水过多漫过石灰块时石灰溶解反而更慢),调成糊状,倒入铁锅中并加足水量,然后用火加热。2.3在石灰乳接近沸腾时,把事先调好的硫磺浆自锅
A composition of lime sulfur agent Sulfur sulfur agent has a strong alkaline, corrosive, the active ingredient is calcium polysulfide (CaS.Sx). Stone sulfur mixture has a strong smell of rotten eggs, the nature of instability, easily by the air of oxygen, carbon dioxide decomposition. In general, lime sulfur agents are not resistant to long-term storage. 2 stone sulfur mixture preparation methods and steps Stone sulfur mixture is made of quick lime, sulfur powder boiled red-brown transparent liquid. Formulation and selection of materials: According to the proportion of 1 part of lime, 2 parts of sulfur and 10 parts of water, the best lime is purer white lump ash, and sulfur should be powdery. 2.1 sulfur powder first with a small amount of water into a paste of sulfur slurry, stirring more evenly better. 2.2 Quicklime into the iron drum, with a small amount of water to dissolve it open (too much water dissolves lime limestone dissolved more slowly), transferred into a paste, into the wok and add enough water, and then use the fire heating. 2.3 in the milk close to boiling, the well-adjusted sulfur slurry from the pan