本溪市水稻全程机械化发展问题

来源 :中国农业信息 | 被引量 : 0次 | 上传用户:b329066975
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
水稻全程机械化让农村劳动力可以从事其他产业,有利于社会经济发展。通过技术措施、技术推广、发展模式、服务体制以及装备手段进行创新,巩固和推进水稻全程机械化又好又快地发展,可以推动优质稻米产业健康发展。
其他文献
一、工程概况及特点山东建工明珠大厦工程位于济南市经一纬三路路口的东南角,南临贵都大酒店,东靠山东邮政中心,总建筑面积92000m2,框筒结构,地下3层,地上49层,总高度188m.由
In this paper, the droplet transfer behavior of the stainless steel coated electrode with double-layer coating is researched by means of those experimental meth
ESD (electrospark deposition) is a promising process to produce hard and wear-resisting coatings on metallic substrates. In this paper microstructure and interf
Aiming at the welding condition of space complex seam is uncertain and the intelligence of welding robot is unideal, a two-wheeled mobile robot is developed. It
The effect of arc on radiation thermometry is analyzed in a field close to the arc during the welding process, and the ratio of signal to noise and other factor
The LY12 Al alloy was brazed with the adoption of the improved KF-CsF-AlF3 flux matching Ag-Al-Cu-Zn filler metal. The shear strength of brazed joint could reac
The effects of two post-weld heat treatment processes on the microstructure and fatigue properties of the electron beam welded joints of 30CrMnSiNi2A steel were
In this paper, nine new filler metals contained Sn and Ga based on Al-11.5Si have been designed for vacuum brazing of Al/Ti. It is found that the addition of Sn
A distributed control system is designed for plasma spraying equipment and the configurations of system software and hardware is discussed. Through founding an