气动跷板式运输工具(右图)是利用斜面滑下的原理把工件运途到目的地。被传送的工件放在小车1上。操作者压紧踏板,压缩空气就进入气缸3的上部。这时活塞向下,滑槽2绕着 A 轴转动,它的右面升高成为斜面。小车和锻件沿斜面滑到滑槽的另一端;小 Pneumatic rocker transport (right) is the use of the principle of sliding down the workpiece to the destination. The workpiece being transported is placed on the carriage 1. The operator presses the pedal and the compressed air enters the upper part of the cylinder 3. At this moment, the piston is down, the chute 2 rotates about the A axis, and the right side of the chute 2 is raised to be a bevel. Car and forging slide along the slope to the other end of the chute;