Design and preparation of multilayer optical coatings for laser crystal Nd:YVO4 and KTP

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:programmelove
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Design and preparation of multilayer optical coatings are investigated on laser crystal Nd:YVO4, YVO4, and frequency doubling crystal KTP substrate. Multilayer optical coatings are deposited on one surface of the crystals using the ion beam sputtering technique, and the other surface is coated with a single SiO2 as protective layer. For the YVO4 crystal after coating, the reflectivity at 1 064 and 532 nm are greater than 99.9% and 99.8%, respectively, and the transmissivity at 808 nm is greater than 91.5%. For the KTP crystal after coating, the reflectivity at 1 064 nm is greater than 99.95%, and the transmissivity at 532 nm is greater than 99.5%. After thermal annealing, the transmissivity can be improved. The obtained coated crystals can be used in high power solid-state lasers.
其他文献
A coherence vortex (CV) carrying topological-charge information in its correlation dimension is a new option for optical manipulation and communication. CV generation by directly modulating the correlation function enables a way to control the light field
期刊
栅网是条纹相机等电子光学仪器的重要组成部件。通过使用有限差分法对栅网的丝径、网孔进行精细建模, 分析了栅网对均匀电场的扰动以及对电子运动的子透镜效应; 使用电子碰撞自由程Gryzinski理论研究了电子和栅网碰撞的二次电子发射问题。结果发现, 对于条纹相机中常用的10, 33, 50 line/mm栅网, 其结构参数的不连续性对均匀电场的扰动分别为0.31%、0.07%、0.04%; 对于入射能量为15 keV的电子, 栅网金属原子Ni、Cr和Cu的非弹性散射碰撞自由程分别为6.85, 10.34, 7.
A flash-lamp-pumped Nd:YAG regenerative amplifier has been developed at 1.06 μm, seeded with 10-ps pulses from a diode-end-pumped and mode-locked Nd:YAG oscillator with homemade semiconductor saturable absorber mirror (SESAM). The pulse energy was amplifi
In this work, we propose a new design of all-optical triplexer based on of metal–insulator–metal (MIM) plasmonic waveguide structures and ring resonators. By adjusting the radii of ring resonators and the gap distance, certain wavelengths can be filtered
移动视觉测量中大量非编码点粘贴在被测物表面。由于图像点在不同站位图像中形状相似,因此无法提供足够多的信息来对其进行分类识别,匹配不同图像间的非编码点是移动视觉测量中的一项重要任务。大量研究证明,极线匹配方法是实现图像点匹配的有效方法。然而移动视觉测量的相机是未经过标定的,在利用极线匹配方法时,图像畸变会使基本矩阵求解精度较低,从而导致大量误匹配情况出现。为了解决该问题,提出一种基于空间交会的非编码
衍射型激光透射塑料焊接技术是一种新型的同步焊接技术。介绍了衍射型激光透射塑料焊接基本原理, 提出了一种基于衍射光学元件的激光同步焊接技术; 建立了衍射模型, 并采用加权G-S算法, 使用Matlab软件模拟计算出权因子大小对所设计的衍射光学元件(DOE)的影响。模拟结果表明, 随着权因子变大, 衍射效率提高, 分布在辐射区域的光强就越多; 均方差(SSE)提高, 整形后光斑的均匀性就降低, 辐射区域的光强就不均。最后, 进行了DOE调制整形的实验, 得到了整形前后激光束光斑形状, 达到预期的图形。
The characteristic of intensity noise is degraded when stimulated Brillouin scattering (SBS) occurs in the fiber transmission systems. We use the localized fluctuating model to study SBS and obtain the curves of intensity fluctuations versus the single-pa
对Er3 掺杂的ZnS在960 nm激光泵浦下的上转换发光作了研究报道.结果表明ZnS:Er3 在960 nm激光的泵浦下具有较强的上转换发光.研究中,对Er3 构成的聚集团(cluster)及Er3 离子之间的相互作用对ZnS:Er3 的上转换发光的影响作了讨论.
The human visual system processes lightness constancy to estimate reflectance under complex viewing conditions. We focus on the underlying reason the human visual system is conscious of haze, and discuss the single-image haze-removal problem based on ligh