论文部分内容阅读
一、传统齿形胶套制作切割带生产中所使用胶套的作用是建立一个相对密封的空间,隔绝内外压力,利用内外压的压差对带坯提供硫化所必须的压力,满足硫化压力的要求。在带坯上硫化出齿形胶套上所设计的齿型。传统的齿形胶套制作工艺是先加工带有齿形的平板模具和接头模具,见图1。胶套所需胶片是在开炼机上把胶料热炼后,一次性出片达到硫化后成品胶套要求的厚度,然后用
First, the traditional toothed rubber sleeve cutting tape production used in the role of plastic sleeve is to establish a relatively sealed space, cut off the pressure inside and outside, the pressure difference between internal and external pressure on the strip to provide the necessary vulcanization to meet the curing pressure Claim. In the strip with a vulcanized toothed rubber sleeve designed toothed. The traditional toothed rubber sleeve production process is to process with a toothed flat mold and connector mold, see Figure 1. Rubber sleeve required film is in the open mill after the rubber compound is hot, one-time film to achieve the desired thickness of vulcanized rubber sleeve, and then use