论文部分内容阅读
1997年12月中旬,本辖区下属某电镀厂发生1起因氰化物中毒导致镀金回收工死亡事件。接到报告后立即组织调查,现将调查结果报告如下。基本情况事故发生企业系原乡镇企业一电镀车间转制而来的一家小型工厂,以镀金和镀银为主。金回收一般每年只进行2次,用15~20g/L氰化物溶液浸泡剥离金膜,再加入盐酸和锌,沉淀后回收,一般请人完成。死者章某,30岁,系该厂门卫,有回收金技术特长,并有多次外出回收金经验。当日由于盲目依仗经验,不愿在有防护设施的车间内操作,也未使用厂内职工递给他的耐酸碱手套,置厂长的交待于不顾,在无任何防护措施的车间外独立操作。上午吸入少量氰化氢气体后稍有不适,仍未加
In mid-December 1997, one death occurred in a plating factory under its jurisdiction resulting in deaths caused by cyanide poisoning. Immediately after receiving the report, we organize the investigation and report the result as follows. Basic situation Accident occurred Enterprise is a township enterprises a plating workshop transformed from a small factory, mainly to gold-plated and silver. Gold recovery generally only 2 times a year, with 15 ~ 20g / L cyanide solution soak peeling gold film, then add hydrochloric acid and zinc, precipitation recovery, the general asked people to complete. The deceased, Zhang, 30, Department of the factory gatekeeper, a recovery of gold technical expertise, and many have experience of recovery gold. Due to blindly relying on experience on the same day, do not want to operate in the protective equipment workshop, did not use the factory workers handed him acid-base gloves, set factory director’s account in disregard, without any protective measures in the workshop independent operation . Morning inhalation of a small amount of hydrogen cyanide gas slightly discomfort, still not added