【摘 要】
：
High-speed dynamic spectrum data of transient detection has become the major means of access to transient information. However, in terms of the characteristic of spectral data excessiveness and transience in the dynamic spectral detection system, the line
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
High-speed dynamic spectrum data of transient detection has become the major means of access to transient information. However, in terms of the characteristic of spectral data excessiveness and transience in the dynamic spectral detection system, the linear charge-coupled device (CCD) used in the system should have real-time-output and match the high-speed data storage equipment. Based on the transient spectrum characteristic, we introduce a high-speed dynamic spectrum data acquisition system with a high-linear array CCD. Through the field of programming gate array, the system provides an accurate driving clock for CCD and generates the control signals for analog-to-digital (A/D) conversion, storage, and transmission. Finally, the collected data by the peripheral component interconnect bus are summarized and filtered in the host computer. The results show that the CCD can stably work with a 40-MHz clock, and the frame scanning frequency can achieve 73 KHz. This design can remarkably complete the real-time measurement of the denotation transient temperature and achieve high-speed spectral information collection and storage with high accuracy and frame scanning frequency. It can be applied to other transient information acquisition.
其他文献
对一种可变增益激光放大器进行了试验，表明它可在宽增益范围内运转。增益是通过在法布里-拍罗腔中放入放大器，并使之振荡来控制的。放大器腔长的小变化引起放大器增益的大变化。已观察到测出的增益变化为20:1。
流量测量在工业生产过程中极其重要，基于光纤布喇格光栅（FBG）的流量传感器具有一系列的优点而备受重视。结合研究成果，详细说明了常见的的靶式FBG流量计、压差式FBG流量计、涡轮式FBG流量计以及其它类型的FBG流量传感器的测量原理和实验情况，最后展望了基于FBG的流量传感器的发展方向。
将载波电子散斑干涉与计算机层析(CT)技术相接合，实现了温度场的三维重建，并就这一技术用于三维温度场重建时的各种特性进行了讨论。
针对水下涵洞降质图像存在裂缝被非均匀悬浮颗粒遮挡的问题,提出了一种基于增强色调特征的涵洞裂缝缺陷分割算法。该算法增强对色彩高敏感的色调特征,并以此为基础对图像进行粗分割。针对涵洞壁凹陷等干扰图像分割结果的问题,在空域上对粗分割结果进行约束,以连通区域为局部单元,对其进行区域特征约束以滤除干扰,完成分割。实验结果表明,该算法能有效地分割被干扰的裂缝缺陷。
对2 μm波段的法布里-珀罗光纤光栅进行了仿真分析和实验制作;设计并搭建了一种基于多通道法布里-珀罗光纤光栅滤波器的三波长间可切换的单纵模复合腔掺铥光纤激光器。激光谐振腔内使用由两个光耦合器组成的8字环无源子腔来扩大纵模间隔;使用自制法布里-珀罗光纤光栅滤波器进行波长选择,并利用偏振控制器调节腔内损耗以抑制光纤激光的强模式竞争;通过应力调节架调节均匀光纤光栅,实现了三个波长间切换的单纵模激光运转。实验结果表明:在室温时,该掺铥光纤激光器可获得输出波长分别为1941.48 nm、1941.57 nm和194
利用飞秒激光辐照结合湿法腐蚀方法，制备了高纵横比硅基狭槽。首先利用透镜聚焦飞秒激光至硅片表面，在硅内部诱导结构变化；再结合氢氟酸(HF)溶液选择性腐蚀去除结构变化区域，从而制备出高纵横比硅基狭槽；最后，通过光学显微镜和扫描电子显微镜对狭槽形貌进行表征，研究了狭槽纵横比对激光加工条件如激光功率、扫描速率和数值孔径的依赖特性。结果表明，激光加工条件对于制备高纵横比硅基狭槽存在最优选择。通过优化激光加工参数，可制备出深度为291 μm，纵横比为25.3 的硅基狭槽。相对于显微物镜，透镜的工作距离较大，加工过程可
我们在真空镀膜机上装置了一套旋转检偏器式的自动光度椭圆偏振仪,对蒸发中的薄膜进行实时偏振测量。然后从偏振参数Δ,ψ随厚度变化的轨迹中分析折射率的非均匀性情况。实验结果表明,ZnS和ZnSe都具有近100的内表面过渡层和外表面过渡层,中间则基本是均匀膜层。
We have performed time-resolved degenerate four-wave mixing (DFWM) experiments in 75Nb_{2}O_{5 }-20TeO_{2}-5ZnO glasses dopedby Er_{2}O_{3} at different excitation intensities and lattice temperatures. DFWM signal exhibits three peaks at high excitation i